Saki Saman, Bolandi Hossein
Department of Electrical Engineering at Iran University of Science and Technology, Iran.
Department of Electrical Engineering at Iran University of Science and Technology, Iran.
ISA Trans. 2022 Nov;130:582-597. doi: 10.1016/j.isatra.2022.03.004. Epub 2022 Mar 14.
Robustness analysis of adaptive control systems, when operating in a certain domain, has been a gulf during the past decades. This problem is more complicated in the case of non-linear dynamic systems including un-modelled dynamics as unstructured uncertainty. To find a clear solution for this famous and interesting problem, limitations and effects of controller operation on performance of on-line model identification procedure (and vice versa) must be determined. In this paper, as the main novelty, we show that it needs some developments and new concepts in robust control theory as the s-gap metric, generalized stability margin (GSM) and modifications on the gain bound calculation. These achievements help us to present an on-line identification method with its convergence proof in sense of the s-gap metric and a relation between GSM and identifier convergence area. Therefore, consideration of GSM in Adaptive Model Predictive Control (AMPC) cost function concludes a systematic solution relating controller robustness and adaptivity, clearly. To this aim, a linear matrix inequality (LMI) representation for GSM constraint is suggested. Also, the stability of AMPC on a certain operating domain is guaranteed in sense of the s-gap metric and GSM. All of these help to determine the attraction area of closed loop system and we show that there exists a trade-off between each two cases of the attraction area size, convergence area size and robustness of closed loop control system. Finally, simulations and experimental results imply on correctness of the proposed method.
在过去几十年中,自适应控制系统在特定领域运行时的鲁棒性分析一直是一个难题。对于包含未建模动态作为非结构化不确定性的非线性动态系统而言,这个问题更为复杂。为了找到这个著名且有趣问题的清晰解决方案,必须确定控制器操作对在线模型识别过程性能的限制和影响(反之亦然)。在本文中,作为主要创新点,我们表明在鲁棒控制理论中需要一些发展和新概念,如s-间隙度量、广义稳定性裕度(GSM)以及增益边界计算的修正。这些成果有助于我们提出一种在线识别方法,并给出其在s-间隙度量意义下的收敛证明以及GSM与识别器收敛区域之间的关系。因此,在自适应模型预测控制(AMPC)成本函数中考虑GSM,显然得出了一种将控制器鲁棒性和适应性联系起来的系统解决方案。为此,提出了GSM约束的线性矩阵不等式(LMI)表示。此外,在s-间隙度量和GSM意义下保证了AMPC在特定操作域上的稳定性。所有这些有助于确定闭环系统的吸引区域,并且我们表明在闭环控制系统的吸引区域大小、收敛区域大小和鲁棒性这三种情况中的任意两种之间存在权衡。最后,仿真和实验结果证明了所提方法的正确性。