Department of Orthopedic Surgery, College of Medicine, Jouf University, Sakakah, Saudi Arabia.
Department of Orthopedic Surgery, College of Medicine, Yonsei University, Seoul, Korea.
BMC Musculoskelet Disord. 2022 Apr 9;23(1):342. doi: 10.1186/s12891-022-05298-6.
Setting bone cutting levels for different joint line orientations of the medial and lateral tibia plateaus in individual patients is not clear. We aimed to evaluate the difference between joint line orientation of the medial and lateral tibia plateaus relative to the horizontal line of mechanical axis of tibia as tibial plateau difference (TPD) for an optimal tibial bone cut in medial unicompartmental knee arthroplasty (UKA) and determine which factors could influence TPD. We aimed to investigate the effect of preoperative TPD on polyethylene liner size in medial UKA.
TPD in the coronal plane were measured in 181 female patients (181 knees). To determine the morphology of proximal tibia according to the severity of osteoarthritis, the patients were classified into three groups based on diagnosis and treatment: 80 who underwent robot-assisted medial UKA, 45 who underwent total knee arthroplasty (TKA), and 56 with early-stage osteoarthritis (OA) who had conservative management. Also, we divided the medial UKA group into two groups according to TPD (greater than or less than 5 mm) and compared polyethylene liner sizes.
No significant difference was observed in TPD (p = 0.662), difference between the medial and lateral femoral condyle levels (p = 0.54), medial proximal tibial angle (p = 0.169), or posterior tibial slope (p = 0.466) among the three groups. Increased TPD was significantly associated with increased mechanical femorotibial angle(mFTA) (p < 0.01). The medial UKA group was divided into two groups according to TPD greater or less than 5 mm. Thicker polyethylene liners were used for groups with TPD greater than 5 mm (8.5 ± 0.7 mm versus 8.2 ± 0.3 mm, p = 0.01). Additionally, the proportion of patients using the thinnest polyethylene (8 mm) in each TPD group (greater or less than 5 mm) was higher in patients with TPD less than 5 mm (82.4% versus 58.7%, p = 0.038).
Preoperative measurement of TPD is important to help surgeons predict the most appropriate bone cutting level in the coronal plane in primary medial UKA. Tibial bone resection would be likely to be thicker than needed in patients with increased TPD in medial UKA.
对于内侧和外侧胫骨平台的不同关节线方向,为每位患者设定截骨平面尚不清楚。我们旨在评估内侧和外侧胫骨平台相对于胫骨机械轴的水平线的关节线方向之间的差异,即胫骨平台差异(TPD),以实现内侧单间室膝关节置换术(UKA)中的最佳胫骨截骨,并确定哪些因素会影响 TPD。我们旨在研究术前 TPD 对内侧 UKA 中聚乙烯衬垫尺寸的影响。
在 181 名女性患者(181 膝)的冠状面上测量 TPD。根据骨关节炎的严重程度,根据诊断和治疗将患者分为三组:80 例行机器人辅助内侧 UKA,45 例行全膝关节置换术(TKA),56 例早期骨关节炎(OA)行保守治疗。此外,我们根据 TPD(大于或小于 5 毫米)将内侧 UKA 组分为两组,并比较聚乙烯衬垫的尺寸。
三组之间 TPD(p=0.662)、内侧和外侧股骨髁水平之间的差异(p=0.54)、内侧胫骨近端角度(p=0.169)或后胫骨斜率(p=0.466)均无显著差异。较大的 TPD 与较大的机械股胫角(mFTA)显著相关(p<0.01)。根据 TPD 大于或小于 5 毫米,将内侧 UKA 组分为两组。TPD 大于 5 毫米的组使用更厚的聚乙烯衬垫(8.5±0.7 毫米与 8.2±0.3 毫米,p=0.01)。此外,在 TPD 小于 5 毫米的每个 TPD 组(大于或小于 5 毫米)中,使用最薄聚乙烯(8 毫米)的患者比例更高(82.4%与 58.7%,p=0.038)。
术前测量 TPD 对于帮助外科医生预测初次内侧 UKA 中冠状面最合适的截骨平面非常重要。内侧 UKA 中 TPD 增加的患者胫骨截骨可能会比需要的更厚。