Ren Liexiang, Liu Jin
Department of Chemistry and Chemical Engineering, Lvliang University Lishi 033001 China
RSC Adv. 2019 Mar 27;9(17):9737-9744. doi: 10.1039/c8ra10550b. eCollection 2019 Mar 22.
A series of gas-separation polyamide-poly(dimethylsiloxane) (PA-PDMS) membranes containing PDMS groups were synthesized through the polycondensation reaction. The structural characteristics of polymers were evaluated by H-NMR spectroscopy (NMR), Fourier-transform infrared spectroscopy (FTIR) and UV-vis absorption spectroscopy. The permeability and selectivity behavior was studied at different temperatures (25-55 °C) and pressures (1.0-3.0 atm), using various gases, such as H, O, CO, CH, and N. The effect of chemical structure, PDMS content, operating pressure and temperature on gas permeability was explored and discussed. Gas-permeation measurements showed that polyamides containing PDMS groups exhibited different separation performance. The PA-PDMS-20 membrane with 20 wt% PDMS exhibited the highest selectivity (CO/N = 41.84 and O/N = 7.01) at 35 °C and 3.0 atm while CO and O permeability was 29.29 barrer and 4.91 barrer, respectively.
通过缩聚反应合成了一系列含有聚二甲基硅氧烷(PDMS)基团的气体分离聚酰胺-聚二甲基硅氧烷(PA-PDMS)膜。通过氢核磁共振光谱(NMR)、傅里叶变换红外光谱(FTIR)和紫外可见吸收光谱对聚合物的结构特征进行了评估。使用氢气、氧气、一氧化碳、甲烷和氮气等各种气体,在不同温度(25-55°C)和压力(1.0-3.0 atm)下研究了渗透性能和选择性行为。探讨并讨论了化学结构、PDMS含量、操作压力和温度对气体渗透性的影响。气体渗透测量表明,含有PDMS基团的聚酰胺表现出不同的分离性能。在35°C和3.0 atm下,PDMS含量为20 wt%的PA-PDMS-20膜表现出最高的选择性(CO/N = 41.84,O/N = 7.01),而CO和O的渗透率分别为29.29巴耳和4.91巴耳。