Department of Chemical Engineering, Motilal Nehru National Institute of Technology Allahabad, Prayagraj 211004, Uttar Pradesh, India.
Department of Chemical Engineering, Indian Institute of Technology Roorkee, Roorkee 247667, Uttarakhand, India.
Bioresour Technol. 2022 Jul;356:127332. doi: 10.1016/j.biortech.2022.127332. Epub 2022 May 16.
This work studied the co-pyrolysis of wheat straw (WS) and polyethylene (PE) via thermogravimetric experiments from room temperature to 1000 °C at various heating rates (10, 20, and 30 °C/min). Thermal behavior revealed that the maximum decomposition of WS, PE, and their blend occurred in three temperature ranges, viz. 250 - 496, 200 - 486, and 200 - 501 °C. Kinetic parameters were determined using model-free isoconversional methods. Activation energy from KAS (163.56, 220.26 and 196.78 kJ/mol for WS, PE, and blend), FWO (165.97, 222.05, 198.86 kJ/mol for WS, PE, and blend), and Starink (163.45, 220.05, 196.46 kJ/mol for WS, PE, and blend) method was estimated. From among various solid-state kinetic models, first-order reaction kinetics and one and two-dimensional diffusion models dominated co-pyrolysis of WS and PE. Thermodynamic parameters confirmed the feasibility of co-pyrolysis of WS and PE while differential thermal analysis signified that endothermic and exothermic reactions occur simultaneously.
本工作通过在不同升温速率(10、20 和 30°C/min)下从室温到 1000°C 的热重实验研究了小麦秸秆(WS)和聚乙烯(PE)的共热解。热行为表明,WS、PE 及其共混物的最大分解发生在三个温度范围内,分别为 250-496°C、200-486°C 和 200-501°C。使用无模型等转化率方法确定了动力学参数。KAS(WS、PE 和共混物的 163.56、220.26 和 196.78 kJ/mol)、FWO(WS、PE 和共混物的 165.97、222.05 和 198.86 kJ/mol)和 Starink(WS、PE 和共混物的 163.45、220.05 和 196.46 kJ/mol)方法的活化能。在所研究的各种固态动力学模型中,一级反应动力学和一维和二维扩散模型主导了 WS 和 PE 的共热解。热力学参数证实了 WS 和 PE 共热解的可行性,而差示热分析表明同时发生了吸热和放热反应。