Effect of Thrombin and Incubation Time on Porcine Whole Blood Clot Elasticity and Recombinant Tissue Plasminogen Activator Susceptibility.

Deep vein thrombosis is a major source of morbidity and mortality worldwide. Catheter-directed thrombolytics are the frontline approach for vessel recanalization, though fibrinolytic efficacy is limited for stiff, chronic thrombi. Although thrombin has been used in preclinical models to induce thrombosis, the effect on lytic susceptibility and clot stiffness is unknown. The goal of this study was to explore the effect of bovine thrombin concentration and incubation time on lytic susceptibility and stiffness of porcine whole blood clots in vitro. Porcine whole blood was allowed to coagulate at 37°C in glass pipets primed with 2.5 or 15 U/mL thrombin for 15 to 120 min. Lytic susceptibility to recombinant tissue plasminogen activator (rt-PA, alteplase) over a range of concentrations (3.15-107.00 µg/mL) was evaluated using percentage clot mass loss. The Young's moduli and degrees of retraction of the clots were estimated using ultrasound-based single-track-location shear wave elasticity and B-mode imaging, respectively. Percentage mass loss decreased and clot stiffness increased with the incubation period. Clots formed with 15 U/mL and incubated for 2 h exhibited properties similar to those of highly retracted clots: Young's modulus of 2.39 ± 0.36 kPa and percentage mass loss of 8.69 ± 2.72% when exposed to 3.15 µg/mL rt-PA. The histological differences between thrombin-induced porcine whole blood clots in vitro and thrombi in vivo are described.