Laurent K, La Ragione L, Jenkins James T, Bewley Gregory P
Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, New York 14853, USA.
Dipartimento di Scienze dell'Ingegneria Civile e dell'Architettura, Politecnico di Bari, 70125 Bari, Italy.
Phys Rev E. 2022 May;105(5-1):054901. doi: 10.1103/PhysRevE.105.054901.
We show how oscillations in fluid flow over a fluid-saturated and porous sediment bed leads to the development of a bedform. To understand the role of pressure fluctuations on the bed associated with flow oscillations, we analyze how the flow penetrates into and through the bed. We then calculate the corresponding vertical pressure gradients within the bed that tend to expand the bed along the vertical direction. When these pressure gradients are large enough, they facilitate small irreversible rearrangements of the grains within the bed, and so cause granular creep. We conjecture that this granular creep alternates with jamming to produce a granular ratchet that slowly lifts the surface of the bed locally where pressure gradients dominate, and depresses the surface where shear stresses dominate. We observe that the shape of the resulting heap exhibits a constant characteristic width. The height of this heap evolves approximately as the square root of time, in agreement with dimensional arguments predicated on a coarse-grained viscous deformation of the bed. The surface of the heap contracts initially with the square root of time, consistent with an incompressible analysis of the flow of grains within the heap. Near its peak the heap grows due to a dilatation of the bed, to inward radial flux, or to a combination of the two.
我们展示了流体在充满流体的多孔沉积层上流动时的振荡如何导致床形的形成。为了理解与流动振荡相关的压力波动对床层的作用,我们分析了流体如何渗透进入并穿过床层。然后我们计算了床层内相应的垂直压力梯度,这些压力梯度倾向于使床层沿垂直方向膨胀。当这些压力梯度足够大时,它们会促使床层内颗粒发生微小的不可逆重排,从而导致颗粒蠕变。我们推测这种颗粒蠕变与堵塞交替出现,形成一个颗粒棘轮,在压力梯度占主导的局部区域缓慢抬升床层表面,而在剪应力占主导的区域压低表面。我们观察到所形成堆积物的形状呈现出恒定的特征宽度。该堆积物的高度大约随时间的平方根演化,这与基于床层粗粒粘性变形的量纲分析一致。堆积物表面最初随时间的平方根收缩,这与对堆积物内颗粒流动的不可压缩分析一致。在接近峰值时,堆积物由于床层的膨胀、向内的径向通量或两者的组合而增长。