Aznar Mollá Francisco, Heredia Alvaro Jose Antonio, Sánchez Oscar Andreu, Fito-López Carlos, Colmenar González Inmaculada
Research Line Sustainable Chemistry and Supramolecular Chemistry, University of Jaume I Castellón, 12071 Castellón de la Plana, Spain.
Industry Chair Director 4.0., University of Jaume I Castellón, 12071 Castellón de la Plana, Spain.
Nanomaterials (Basel). 2022 Jun 14;12(12):2036. doi: 10.3390/nano12122036.
The use, production, and disposal of engineering nanomaterials (ENMs), including graphene-related materials (GRMs), raise concerns and questions about possible adverse effects on human health and the environment, considering the lack of harmonized toxicological data on ENMs and the ability of these materials to be released into the air, soil, or water during common industrial processes and/or accidental events. Within this context, the potential release of graphene particles, their agglomerates, and aggregates (NOAA) as a result of sanding of a battery of graphene-based polyester resin composite samples intended to be used in a building was examined. The analyzed samples were exposed to different weathering conditions to evaluate the influence of the weathering process on the morphology and size distribution of the particles released. Sanding studies were conducted in a tailored designed sanding bench connected to time and size resolving measurement devices. Particle size distributions and particle number concentration were assessed using an optical particle counter (OPC) and a condensation particle counter (CPC), respectively, during the sanding operation. A scanning electron microscope/energy dispersive X-ray (SEM/EDX) analysis was performed to adequately characterize the morphology, size, and chemical composition of the released particles. A toxicity screening study of pristine and graphene-based nanocomposites released using the aquatic macroinvertebrate Daphnia magna and relevant human cell lines was conducted to support risk assessment and decision making. The results show a significant release of nanoscale materials during machining operations, including differences attributed to the % of graphene and weathering conditions. The cell line tests demonstrated a higher effect in the human colon carcinoma cell line Caco2 than in the human fibroblasts (A549 cell line), which means that composites released to the environment could have an impact on human health and biota.
考虑到工程纳米材料(ENM),包括石墨烯相关材料(GRM)缺乏统一的毒理学数据,以及这些材料在常见工业过程和/或意外事件中释放到空气、土壤或水中的可能性,其使用、生产和处置引发了对人类健康和环境可能产生的不利影响的担忧和疑问。在此背景下,对一批拟用于建筑的石墨烯基聚酯树脂复合材料样品进行打磨时,研究了石墨烯颗粒、其团聚体和聚集体(NOAA)的潜在释放情况。对分析的样品进行不同的风化条件处理,以评估风化过程对释放颗粒的形态和尺寸分布的影响。打磨研究在一个定制设计的打磨台上进行,该打磨台连接到时间和尺寸分辨测量设备。在打磨操作过程中,分别使用光学粒子计数器(OPC)和冷凝粒子计数器(CPC)评估粒径分布和粒子数浓度。进行扫描电子显微镜/能量色散X射线(SEM/EDX)分析,以充分表征释放颗粒的形态、尺寸和化学成分。使用大型水生无脊椎动物大型溞和相关人类细胞系对原始和石墨烯基纳米复合材料的释放进行毒性筛选研究,以支持风险评估和决策。结果表明,在加工操作过程中会大量释放纳米级材料,包括因石墨烯百分比和风化条件而产生的差异。细胞系测试表明,在人结肠癌细胞系Caco2中产生的影响高于人成纤维细胞(A549细胞系),这意味着释放到环境中的复合材料可能会对人类健康和生物群产生影响。