Department of Mechanical Engineering, Stanford University, Stanford, CA, United States.
Department of Mechanical Engineering, Stanford University, Stanford, CA, United States; Department of Veterans Affairs Healthcare System, Palo Alto, CA, United States; Department of Bioengineering, Stanford University, Stanford, CA, United States.
J Biomech. 2022 Aug;141:111204. doi: 10.1016/j.jbiomech.2022.111204. Epub 2022 Jun 20.
People with knee osteoarthritis who adopt a modified foot progression angle (FPA) during gait often benefit from a reduction in the knee adduction moment. It is unknown, however, whether changes in the FPA increase hip moments, a surrogate measure of hip loading, which will increase the mechanical demand on the joint. This study examined how altering the FPA affects hip moments. Individuals with knee osteoarthritis walked on an instrumented treadmill with their baseline gait, 10° toe-in gait, and 10° toe-out gait. A musculoskeletal modeling package was used to compute joint moments from the experimental data. Fifty participants were selected from a larger study who reduced their peak knee adduction moment with a modified FPA. In this group, participants reduced the first peak of the knee adduction moment by 7.6% with 10° toe-in gait and reduced the second peak by 11.0% with 10° toe-out gait. Modifying the FPA reduced the early-stance hip abduction moment, at the time of peak hip contact force, by 4.3% ± 1.3% for 10° toe-in gait (p = 0.005, d = 0.49) and by 4.6% ± 1.1% for 10° toe-out gait (p < 0.001, d = 0.59) without increasing the flexion and internal rotation moments (p > 0.15). Additionally, 74% of individuals reduced their total hip moment at time of peak hip contact force with a modified FPA. In summary, when adopting a FPA modification that reduced the knee adduction moment, participants, on average, did not increase surrogate measures of hip loading.
患有膝骨关节炎的患者在行走时采用改良的足进角(FPA),通常会受益于减少膝关节内收力矩。然而,目前尚不清楚 FPA 的变化是否会增加髋关节力矩,髋关节力矩是髋关节负荷的替代测量指标,这会增加关节的机械需求。本研究探讨了改变 FPA 如何影响髋关节力矩。患有膝骨关节炎的个体在配备仪器的跑步机上行走,采用其基线步态、10°足内翻步态和 10°足外翻步态。使用肌肉骨骼建模软件包根据实验数据计算关节力矩。从更大的研究中选择了 50 名参与者,他们通过改变 FPA 减少了峰值膝关节内收力矩。在该组中,参与者通过 10°足内翻步态将第一峰值膝关节内收力矩减少了 7.6%,通过 10°足外翻步态将第二峰值减少了 11.0%。改变 FPA 减少了髋关节接触力峰值时的早期站立髋关节外展力矩,10°足内翻步态时减少了 4.3%±1.3%(p=0.005,d=0.49),10°足外翻步态时减少了 4.6%±1.1%(p<0.001,d=0.59),而不增加屈曲和内旋力矩(p>0.15)。此外,74%的个体通过改变 FPA 减少了髋关节接触力峰值时的总髋关节力矩。总之,当采用降低膝关节内收力矩的 FPA 改变时,参与者平均不会增加髋关节负荷的替代测量指标。