Cao Pengfei, Li Yuan, Deng Yubo, Wu Yuyao
School of Information Science and Engineering, Lanzhou University, Lanzhou 730000, People's Republic of China.
Nanotechnology. 2022 Jul 15;33(40). doi: 10.1088/1361-6528/ac7d60.
A terahertz constant frequency reconfigurable metasurface based on tunable electromagnetically induced transparency (EIT)-like property was designed, whose transparency window frequency did not vary with Fermi energy. This structure was composed of two single-layer graphene resonators, namely, left double big rings and right double small rings. An evident transparency window (EIT-like phenomenon) was caused by the near-field coupling between bright modes of the two resonators in the transmission spectrum, in which amplitude over 80% was acquired at 1.98 THz. By individually reconfiguring the Fermi energy of each resonator, the EIT-like effects, transparency window amplitude, modulation speed and group delay could be actively controlled while the frequency of EIT-like window remained constant. Significantly, the transparency window was fully modulated without changing the frequency, and the maximum modulation depth reached 78%. Furthermore, the modulation speed also increased because the total graphene areawas effectively reduced in the proposed structure. Compared with other metasurface structures, the modulation properties of the proposed structure showed higher performance while the EIT-like window frequency remained static. This research provides an alternative method for developing constant frequency reconfigurable modulation terahertz devices (such as optical switches and modulators), as well as a potential approach for miniaturization of terahertz devices.
设计了一种基于可调谐类电磁诱导透明(EIT)特性的太赫兹恒频可重构超表面,其透明窗口频率不随费米能量变化。该结构由两个单层石墨烯谐振器组成,即左侧双大环和右侧双小环。在透射谱中,两个谐振器的亮模式之间的近场耦合导致了明显的透明窗口(类EIT现象),其中在1.98太赫兹处获得了超过80%的幅度。通过分别重新配置每个谐振器的费米能量,可以在类EIT窗口频率保持恒定的同时,主动控制类EIT效应、透明窗口幅度、调制速度和群延迟。值得注意的是,在不改变频率的情况下对透明窗口进行了完全调制,最大调制深度达到78%。此外,由于在所提出的结构中有效减少了石墨烯的总面积,调制速度也有所提高。与其他超表面结构相比,在所提出的结构中,类EIT窗口频率保持不变时,其调制特性表现出更高的性能。这项研究为开发恒频可重构调制太赫兹器件(如光开关和调制器)提供了一种替代方法,也为太赫兹器件的小型化提供了一种潜在途径。