Wöpke Christopher, Göhler Clemens, Saladina Maria, Du Xiaoyan, Nian Li, Greve Christopher, Zhu Chenhui, Yallum Kaila M, Hofstetter Yvonne J, Becker-Koch David, Li Ning, Heumüller Thomas, Milekhin Ilya, Zahn Dietrich R T, Brabec Christoph J, Banerji Natalie, Vaynzof Yana, Herzig Eva M, MacKenzie Roderick C I, Deibel Carsten
Institut für Physik, Technische Universität Chemnitz, 09126, Chemnitz, Germany.
Institute of Materials for Electronics and Energy Technology (i-MEET), Friedrich-Alexander-Universität Erlangen-Nürnberg, 91054, Erlangen, Germany.
Nat Commun. 2022 Jul 1;13(1):3786. doi: 10.1038/s41467-022-31326-z.
Stability is one of the most important challenges facing material research for organic solar cells (OSC) on their path to further commercialization. In the high-performance material system PM6:Y6 studied here, we investigate degradation mechanisms of inverted photovoltaic devices. We have identified two distinct degradation pathways: one requires the presence of both illumination and oxygen and features a short-circuit current reduction, the other one is induced thermally and marked by severe losses of open-circuit voltage and fill factor. We focus our investigation on the thermally accelerated degradation. Our findings show that bulk material properties and interfaces remain remarkably stable, however, aging-induced defect state formation in the active layer remains the primary cause of thermal degradation. The increased trap density leads to higher non-radiative recombination, which limits the open-circuit voltage and lowers the charge carrier mobility in the photoactive layer. Furthermore, we find the trap-induced transport resistance to be the major reason for the drop in fill factor. Our results suggest that device lifetimes could be significantly increased by marginally suppressing trap formation, leading to a bright future for OSC.
稳定性是有机太阳能电池(OSC)材料研究在进一步商业化道路上面临的最重要挑战之一。在本文研究的高性能材料体系PM6:Y6中,我们研究了倒置光伏器件的降解机制。我们确定了两种不同的降解途径:一种需要光照和氧气同时存在,其特征是短路电流降低,另一种是由热诱导的,其特征是开路电压和填充因子严重损失。我们将研究重点放在热加速降解上。我们的研究结果表明,块状材料特性和界面保持显著稳定,然而,活性层中老化诱导的缺陷态形成仍然是热降解的主要原因。陷阱密度的增加导致更高的非辐射复合,这限制了开路电压并降低了光活性层中的电荷载流子迁移率。此外,我们发现陷阱诱导的传输电阻是填充因子下降的主要原因。我们的结果表明,通过略微抑制陷阱形成,可以显著提高器件寿命,为有机太阳能电池带来光明的未来。