Pyrolysis and Oxidation of Waste Tire Oil: Analysis of Evolved Gases.

Valorization of waste such as waste tires offers a way to manage and reduce urban waste while deriving economic benefits. The rubber portion of waste tires has high potential to produce pyrolysis fuels that can be used for energy production or further upgraded for use as blend fuel with diesel. In the preset work, waste tire oil (WTO) was produced from the pyrolysis of waste tires in an electric heating furnace at 500-550 °C in the absence of oxygen. Pyrolysis (in nitrogen) and oxidation (in air) of the obtained WTO sample were then performed in a thermogravimetric (TG) furnace that was connected to a Fourier transform infrared cell where the evolved gases were analyzed. The WTO sample was heated up to 800 °C in the TG furnace where the temperature of the sample was ramped up at three heating rates, namely, 5, 10, and 20 °C/min. The TG mass loss and differential thermogravimetric mass loss plots were used to analyze the thermal degradation pathways. Kinetic analysis was performed using the distributed activation energy model to estimate the activation energies along the various stages of the reaction. The pollutant gases, namely, CO, CO, NO, and HO, formed during WTO oxidation were evaluated by means of the characteristic infrared absorbance. The functional groups evolved during pyrolysis, namely, alkanes, alkenes, aromatics, and carbonyl groups, were also analyzed. The obtained information can be used for the better design of gasifiers and combustors, to ensure the formation of high-value gaseous products while reducing the emissions. The utilization of waste tires by producing pyrolysis oils thus offers a way of tackling the menace of waste tires while acting as a potential energy source.