Suppr超能文献

在甲烷发酵过程中使用生物炭-硫复合材料提高沼气产量。

Enhanced Production of Biogas Using Biochar-Sulfur Composite in the Methane Fermentation Process.

作者信息

Syguła Ewa, Gałęzowska Michalina, Białowiec Andrzej

机构信息

Department of Applied Bioeconomy, Wrocław University of Environmental and Life Sciences, 37a Chełmońskiego Str., 51-630 Wrocław, Poland.

出版信息

Materials (Basel). 2022 Jun 27;15(13):4517. doi: 10.3390/ma15134517.

Abstract

The methane fermentation of organic waste is one way to minimize organic waste, which accounts for 77% of the global municipal waste stream. The use of biochar as an additive for methane fermentation has been shown to increase the production potential of biogas. Sulfur waste has a potential application to synergistic recycling in a form of composites with other materials including biochar. A composite product in the form of a mixture of biochar and molten sulfur has been proposed. In this experiment, additions of the sulfur−biochar composite (SBC) were tested to improve the fermentation process. The biochar was produced from apple chips under the temperature of 500 °C. The ground biochar and sulfur (<1 mm particle size) were mixed in the proportion of 40% biochar and 60% sulfur and heated to 140 °C for sulfur melting. After cooling, the solidified composite was ground. The SBC was added in the dose rate of 10% by dry mass of prepared artificial kitchen waste. Wet anaerobic digestion was carried out in the batch reactors under a temperature of 37 °C for 21 days. As an inoculum, the digestate from Bio-Wat Sp. z. o. o., Świdnica, Poland, was used. The results showed that released biogas reached 672 mL × gvs−1, and the yield was 4% higher than in the variant without the SBC. Kinetics study indicated that the biogas production constant rate reached 0.214 d−1 and was 4.4% higher than in the variant without the SBC.

摘要

有机废物的甲烷发酵是减少有机废物的一种方法,有机废物占全球城市废物流的77%。已证明使用生物炭作为甲烷发酵的添加剂可提高沼气的生产潜力。硫废物具有与包括生物炭在内的其他材料以复合材料形式进行协同回收的潜在应用。有人提出了一种生物炭与熔融硫混合物形式的复合产品。在本实验中,测试了添加硫-生物炭复合材料(SBC)以改善发酵过程。生物炭由苹果片在500℃的温度下制成。将磨碎的生物炭和硫(粒径<1毫米)按生物炭40%和硫60%的比例混合,并加热至140℃使硫熔化。冷却后,将固化的复合材料研磨。SBC按制备的人工厨房废物干质量的10%的剂量率添加。在间歇式反应器中于37℃的温度下进行湿式厌氧消化21天。作为接种物,使用了来自波兰什维德尼察的Bio-Wat Sp. z. o. o. 的消化液。结果表明,释放的沼气达到672 mL×gvs−1,产率比不添加SBC的变体高4%。动力学研究表明,沼气生产恒定速率达到0.214 d−1,比不添加SBC的变体高4.4%。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/beb8/9267185/f0d260779a7f/materials-15-04517-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验