Suppr超能文献

冠状突和第五掌骨基底骨折的背侧固定:尺神经的解剖评估。

Dorsal Fixation of Coronal Hamate and Fifth Metacarpal Base Fractures: An Anatomic Evaluation of the Ulnar Nerve.

机构信息

Division of Plastic and Reconstructive Surgery, Department of Surgery, Icahn School of Medicine at Mount Sinai, New York, NY; Division of Hand Surgery, Department of Surgery, Elmhurst Hospital Center, Queens, NY.

Division of Plastic and Reconstructive Surgery, Department of Surgery, Icahn School of Medicine at Mount Sinai, New York, NY; Division of Hand Surgery, Department of Surgery, Elmhurst Hospital Center, Queens, NY.

出版信息

J Hand Surg Am. 2024 Jan;49(1):59.e1-59.e6. doi: 10.1016/j.jhsa.2022.04.023. Epub 2022 Jul 19.

Abstract

PURPOSE

Traumatic drill overshoot during dorsal fixation of coronal hamate and fifth metacarpal base fractures risks iatrogenic ulnar nerve injury. This study describes the anatomic relationships between exiting volar drill tips and ulnar nerve branches.

METHODS

Dorsal drilling of hamate bones and fifth metacarpal bases was performed on cadavers. Dorsal hamate bodies were subdivided into 4 quadrants: (1) distal-ulnar, (2) distal-radial, (3) proximal-ulnar, and (4) proximal-radial. Screws measuring 5 mm more than the dorsal-to-volar bone depths were placed in each quadrant to represent drill exit trajectories with consistent overshoot. A single screw was similarly placed 5 mm distal to the midline articular surface of the dorsal fifth metacarpal base. Distances between estimated drill tips and ulnar nerve branches were measured.

RESULTS

Ten cadaver hands were examined. The fifth metacarpal base screw tips directly abutted the ulnar motor branch in 6 hands, and were within 1 mm in 4 hands (mean, 0.4 ± 0.5 mm). Distances from the tips to the ulnar motor and sensory branches were largest in the distal-radial quadrant (11.8 ± 0.8 mm and 9.2 ± 1.9 mm, respectively) and smallest in the proximal-ulnar quadrant (7.3 ± 1.5 mm and 4.3 ± 1.1 mm, respectively). Distances to the ulnar motor and sensory branches were similar between the proximal-ulnar and distal-ulnar quadrants, and between the proximal-radial and distal-radial quadrants.

CONCLUSIONS

Dorsal drilling of coronal hamate fractures appears to be safe, as volar drill tips are well away from ulnar nerve motor and sensory branches. Distances to ulnar nerve branches are largest, and theoretically safest, with dorsal drilling in the distal-radial hamate. Dorsal drilling of fifth metacarpal base fractures appears to carry a high risk for potential ulnar motor nerve injury.

CLINICAL RELEVANCE

These findings may help minimize potential risks for iatrogenic ulnar nerve injury with dorsal drilling of hamate and fifth metacarpal base fractures.

摘要

目的

在冠状突和第五掌骨基底骨折的背侧固定过程中,钻头穿透会增加医源性尺神经损伤的风险。本研究描述了现有的掌侧钻头尖端与尺神经分支之间的解剖关系。

方法

对尸体进行了手舟骨和第五掌骨基底的背侧钻孔。将背侧手舟骨分为 4 个象限:(1)远侧-尺侧,(2)远侧-桡侧,(3)近侧-尺侧,和(4)近侧-桡侧。在每个象限中放置比背侧到掌侧骨深度长 5 毫米的螺钉,以代表具有一致超程的钻头出口轨迹。同样,在第五掌骨基底背侧关节面远端 5 毫米处,单独放置一个螺钉。测量估计的钻头尖端和尺神经分支之间的距离。

结果

检查了 10 具尸体手。第五掌骨基底螺钉尖端直接贴附在 6 只手的尺神经运动支上,4 只手在 1 毫米以内(平均 0.4±0.5 毫米)。尖端到尺神经运动和感觉支的距离在远侧-桡侧象限最大(分别为 11.8±0.8 毫米和 9.2±1.9 毫米),在近侧-尺侧象限最小(分别为 7.3±1.5 毫米和 4.3±1.1 毫米)。近侧-尺侧和远侧-尺侧象限之间以及近侧-桡侧和远侧-桡侧象限之间,尺神经运动和感觉支到尖端的距离相似。

结论

冠状突手舟骨骨折的背侧钻孔似乎是安全的,因为掌侧钻头尖端远离尺神经运动和感觉支。在远侧-桡侧手舟骨进行背侧钻孔时,与尺神经分支的距离最大,理论上最安全。第五掌骨基底骨折的背侧钻孔似乎存在尺神经运动支损伤的高风险。

临床意义

这些发现可能有助于通过背侧钻孔治疗手舟骨和第五掌骨基底骨折,尽量减少医源性尺神经损伤的潜在风险。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验