Department of Chemistry, Indian Institute of Technology Patna, Patna, Bihar 801103, India.
Langmuir. 2022 Aug 2;38(30):9347-9362. doi: 10.1021/acs.langmuir.2c01207. Epub 2022 Jul 22.
Poloxamer 407 (P-407) composed of a poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (PEG-PPG-PEG) unit has two distinct microenvironments: the interior core formed by the PPG unit and the exterior shell formed by the PEG unit. In this work, we have used two fluorescent molecules coumarin-153 and 8-anilino-1-naphthalene sulfonic acid (ANS) of contrasting natures to characterize and probe the water dynamics in the core and corona regions of the copolymer by means of spectroscopic techniques, namely, absorption, fluorescence, and time-resolved fluorescence emission spectroscopy and Fourier transform infrared (FTIR) spectroscopy. Changes in the surface morphologies were characterized by using microscopic techniques. Further, two classes of osmolytes kosmotropic (betaine and sarcosine) and chaotropic (urea) known to perturb the water structure were added to aqueous solutions of P-407. Our studies reveal that the addition of kosmotropes decreases the critical micelle temperature (CMT) of the copolymer, whereas the chaotropic osmolyte increases the CMT. Steady-state studies reveal that the addition of the osmolytes to the copolymer increases the polarity of the micelle formed and hence results in the red shift in the ANS absorbance maximum. FTIR spectroscopy reveals that kosmotropes interact with the PEG moiety of the copolymer, whereas the chaotrope interacts with both the PEG and PPG moieties of the copolymer. Solvent relaxation studies produced less changes upon the addition of the kosmotropes, whereas a greater change in the relaxation time was observed in the presence of the chaotrope.
泊洛沙姆 407(P-407)由聚(乙二醇)-嵌段-聚(丙二醇)-嵌段-聚(乙二醇)(PEG-PPG-PEG)单元组成,具有两个截然不同的微环境:由 PPG 单元形成的内部核心和由 PEG 单元形成的外部壳。在这项工作中,我们使用了两种荧光分子香豆素 153 和 8-苯胺-1-萘磺酸(ANS),它们的性质截然不同,通过光谱技术(即吸收、荧光和时间分辨荧光发射光谱和傅里叶变换红外(FTIR)光谱)来表征和探测共聚物的核区和冠区的水动力学。使用显微镜技术对表面形貌的变化进行了表征。此外,还向 P-407 的水溶液中添加了两种已知能扰乱水结构的亲水分子(甜菜碱和肌氨酸)和疏水分子(尿素)。我们的研究表明,亲水分子的添加降低了共聚物的临界胶束温度(CMT),而疏水分子则增加了 CMT。稳态研究表明,向共聚物中添加渗透压剂会增加形成的胶束的极性,从而导致 ANS 吸收最大值的红移。FTIR 光谱表明,亲水分子与共聚物的 PEG 部分相互作用,而疏水分子与共聚物的 PEG 和 PPG 部分相互作用。溶剂弛豫研究表明,亲水分子的添加引起的变化较小,而在存在疏水分子的情况下,弛豫时间的变化较大。