Department of Biomedical Engineering, Tehran Science and Research Branch, Islamic Azad University, Tehran, Iran.
Proc Inst Mech Eng H. 2022 Sep;236(9):1449-1456. doi: 10.1177/09544119221112533. Epub 2022 Jul 27.
Tracheal stenting is a common method which is widely used to cure different tracheal disorders including airways stenosis, chronic coughs, and accidents. In this study, we aimed to analyze the reaction of the trachea wall to exhale in three phases of light, moderate, and vigorous activities at air flows of 15 L/min (light), 26 L/min (medium), and 30 L/min (vigorous). Fluid structure interaction (FSI) was used for the numerical analysis using computed tomography (CT) images. The flow was assumed incompressible and turbulent. The stent is silicone with a Young's modulus equal to 1 MPa, Poisson's ratio 0.28, and density of 2330 kg/m. The stent length was 60 mm and fix support boundary condition was applied for all inputs and outputs. Numerical simulation was performed using ANSYS software. The induced stresses, strains, wall deformation, flow pressure, and the flow velocity were obtained. The results showed that the stent prevented the local deformation of the wall of trachea and it reduced the induced strain in the position. But the stenting could lead to stress concentration. Finally, the stent prevented the damage to the trachea muscles during coughs in row.
气管支架置入术是一种常见的方法,广泛用于治疗包括气道狭窄、慢性咳嗽和意外在内的各种气管疾病。在这项研究中,我们旨在分析在空气流量为 15 L/min(轻度)、26 L/min(中度)和 30 L/min(重度)的三个轻、中、重活动阶段,气管壁对呼气的反应。使用计算断层扫描(CT)图像进行了数值分析,采用流固耦合(FSI)方法。假设流动是不可压缩和湍流的。支架是硅酮材料,杨氏模量为 1 MPa,泊松比为 0.28,密度为 2330 kg/m。支架长度为 60mm,所有输入和输出均采用固定支撑边界条件。使用 ANSYS 软件进行数值模拟。获得了诱导应力、应变、壁变形、流动压力和流速。结果表明,支架防止了气管壁的局部变形,并减少了该位置的诱导应变。但支架会导致应力集中。最后,支架防止了咳嗽时气管肌肉的损伤。