Dalian Medical University, Dalian, 116044, Liaoning Province, China.
Department of Orthopedic Trauma, The First Affiliated Hospital of Dalian Medical University, 222 Zhong Shan Road, Xi Gang District, Dalian, 116011, Liaoning Province, China.
Sci Rep. 2022 Jul 27;12(1):12790. doi: 10.1038/s41598-022-17221-z.
This study investigates the application of the 150° tangential fluoroscopic projection as a novel fluoroscopic view to detect the posterosuperior screw in-out-in (IOI) in the cannulated screws fixation of femoral neck fractures. A retrospective analysis was conducted including 33 patients with femoral neck fractures enrolled from April to November 2021. All patients underwent closed reduction and internal fixation with cannulated screws under intra-operative C-arm fluoroscopy. The posterosuperior femoral neck screw position (whether in-out-in and the distance to the femoral neck cortex) was evaluated from the standard anteroposterior (AP), lateral view, and tangential view images. Postoperative computed tomography (CT) scan results are considered the gold standard for detecting the femoral neck screw locations. Of 33 patients, no femoral neck screws were found to be placed IOI under the standard AP and lateral views. The tangential view revealed the posterosuperior screw was IOI in 8 patients, whereas the average distance between the posterosuperior screw and the posterior femoral neck cortex was 2.73 ± 1.06 mm under the standard lateral view. Postoperative CT verified that posterosuperior screw was placed IOI in these 8 patients. In the other 25 patients with the tangential view showed the posterosuperior screw completely contained in the femoral neck, the average distance between the posterosuperior screw and the posterior femoral neck cortex was 5.48 ± 1.26 mm under the standard lateral view and 2.76 ± 1.08 mm under the tangential view, with a statistically significant difference between the two groups (p < 0.05). Post-operative CT demonstrated that the femoral neck screws were completely contained in the femoral neck in these 25 patients. Intra-operative tangential view of 150° can effectively identify the posterosuperior screw IOI in the cannulated screws fixation of femoral neck fractures. Based on our study, we highly recommend the tangential view as a routine intraoperative fluoroscopic angle to detect the posterosuperior screw IOI.
本研究探讨了 150°切线透视投影作为一种新的透视视图在检测股骨颈骨折空心螺钉固定后上螺钉进出(IOI)中的应用。回顾性分析了 2021 年 4 月至 11 月收治的 33 例股骨颈骨折患者。所有患者均在术中 C 臂透视下闭合复位空心螺钉内固定。从标准前后位(AP)、侧位和切线位图像评估后上股骨颈螺钉位置(是否进出及与股骨颈皮质的距离)。术后计算机断层扫描(CT)结果被认为是检测股骨颈螺钉位置的金标准。在 33 例患者中,标准 AP 和侧位片均未见股骨颈螺钉 IOI。切线位显示 8 例患者后上螺钉 IOI,而标准侧位显示后上螺钉与后股骨颈皮质的平均距离为 2.73±1.06mm。术后 CT 证实这 8 例患者后上螺钉 IOI。在另外 25 例切线位显示后上螺钉完全包含在股骨颈内的患者中,标准侧位显示后上螺钉与后股骨颈皮质的平均距离为 5.48±1.26mm,切线位为 2.76±1.08mm,两组间差异有统计学意义(p<0.05)。术后 CT 证实这 25 例患者股骨颈螺钉完全包含在股骨颈内。术中 150°切线位可有效识别空心螺钉固定股骨颈骨折后上螺钉 IOI。基于我们的研究,我们强烈推荐切线位作为常规术中透视角度,以检测后上螺钉 IOI。