Department of Veterinary Medicine, College of Food and Agriculture, United Arab Emirates University, Al Ain, UAE.
Department of Clinical Sciences, College of Veterinary Medicine, King Faisal University, Al-Hasa, Saudi Arabia.
Sci Rep. 2022 Jul 27;12(1):12818. doi: 10.1038/s41598-022-16801-3.
The knowledge gap regarding the topography and anatomy of the dromedary's carpal joint must be bridged to improve diagnostic and treatment procedures such as ultrasonography, arthrocentesis, and arthroscopy. Thirty-five distal forelimbs were harvested from 21 dromedaries and studied through gross dissection, casting, ultrasonography, and computerized tomography. Representative three-dimensional models of the joint cavities, recesses, and pouches were obtained using various casting agents. The safety and feasibility of different arthrocentesis approaches were evaluated. This study provides a detailed description of dorsally located joint recesses and palmarly located joint pouches. The dorsomedial and dorsolateral approach is recommended for arthroscopy and arthrocentesis of the radiocarpal and intercarpal joint when the carpus is flexed. However, caution must be exercised during these approaches to prevent needle injury to the articulating cartilage. Caution is necessary to prevent the formation of inadvertent communication between the dorsally located tendon sheaths and joint cavities. Arthrocentesis via the lateral approach to the lateropalmar pouch is the most favourable approach for the radiocarpal joint. A subtendinous synovial bursa was found between the lateropalmar pouch of the radiocarpal joint and the extensor carpi ulnaris muscle. The subtendinous synovial bursa must be considered during the lateral arthrocentesis approach. The palmar approach is not recommended for arthrocentesis due to the high risk of injury to nerves, veins, and arteries located palmarly.
为了改善超声检查、关节穿刺和关节镜检查等诊断和治疗程序,必须缩小对单峰驼腕关节解剖结构和解剖学的认识差距。本研究从 21 峰骆驼中采集了 35 个远端前肢,通过大体解剖、铸型、超声检查和计算机断层扫描进行了研究。使用不同的铸型剂获得了关节腔、隐窝和囊袋的代表性三维模型。评估了不同关节穿刺方法的安全性和可行性。本研究详细描述了背侧关节隐窝和掌侧关节囊袋。当腕关节弯曲时,推荐使用背侧和背外侧入路进行腕关节和腕掌关节的关节镜检查和关节穿刺。然而,在这些入路中必须小心谨慎,以防止针损伤关节软骨。在背侧肌腱鞘和关节腔之间形成的无意沟通时,需要小心。通过掌侧外侧入路对掌侧外侧囊进行关节穿刺是桡腕关节最有利的入路。在桡腕关节掌侧外侧囊和尺侧腕伸肌之间发现了一个腱下滑膜囊。在进行外侧关节穿刺时必须考虑到腱下滑膜囊。由于掌侧存在神经、静脉和动脉,因此不建议进行掌侧关节穿刺。