Xiao Yue, Zeng Zhiqing, Deng Ziyang, Lin Chao, Xie Zuquan
School of Mechanical Engineering, Nanchang Institute of Technology, Nanchang, Jiangxi 330099, China.
Comput Intell Neurosci. 2022 Jul 22;2022:4835157. doi: 10.1155/2022/4835157. eCollection 2022.
This paper solves the problem of difficulty in achieving satisfactory results with traditional methods of bearing fault diagnosis, which can effectively extract the fault information and improve the fault diagnosis accuracy. This paper proposes a novel artificial intelligence fault diagnosis method by integrating complementary ensemble empirical mode decomposition (CEEMD), energy entropy (EE), and probabilistic neural network (PNN) optimized by a sparrow search algorithm (SSA). The vibration signal of rolling bear was firstly decomposed by CEEMD into a set of intrinsic mode functions (IMFs) at different time scales. Then, the correlation coefficient was used as a selection criterion to determine the effective IMFs, and the signal features were extracted by EE as the input of the diagnosis model to suppress the influence of the redundant information and maximize the retention of the original signal features. Afterwards, SSA was used to optimize the smoothing factor parameter of PNN to reduce the influence of human factors on the neural network and improve the performance of the fault diagnosis model. Finally, the proposed CEEMD-EE-SSA-PNN method was verified and evaluated by experiments. The experimental results indicate that the presented method can accurately identify different fault states of rolling bearings and achieve better classification performance of fault states compared with other methods.
本文解决了传统轴承故障诊断方法难以取得满意结果的问题,该方法能够有效提取故障信息并提高故障诊断准确率。本文提出了一种新颖的人工智能故障诊断方法,该方法通过将互补总体经验模态分解(CEEMD)、能量熵(EE)和通过麻雀搜索算法(SSA)优化的概率神经网络(PNN)相结合。首先,通过CEEMD将滚动轴承的振动信号分解为一组不同时间尺度的固有模态函数(IMF)。然后,以相关系数作为选择标准来确定有效的IMF,并通过能量熵提取信号特征作为诊断模型的输入,以抑制冗余信息的影响并最大程度地保留原始信号特征。之后,使用麻雀搜索算法优化概率神经网络的平滑因子参数,以减少人为因素对神经网络的影响并提高故障诊断模型的性能。最后,通过实验对所提出的CEEMD-EE-SSA-PNN方法进行验证和评估。实验结果表明,与其他方法相比,该方法能够准确识别滚动轴承的不同故障状态,并实现更好的故障状态分类性能。