Electrocatalytic Removal of Low-Concentration Uranium Using TiO Nanotube Arrays/Ti Mesh Electrodes.

Groundwater containing naturally occurring uranium is a conventional drinking water source in many countries. Removal of low concentrations of uranium complexes in groundwater is a challenging task. Here, we demonstrated that the TiO nanotube arrays/Ti (TNTAs/Ti) mesh electrode could break through the concentration limit and efficiently remove low concentrations of uranium complexes from both simulated and real groundwater. U(VI) complexes in groundwater were electro-reduced to UO and deposited on the TNTAs/Ti mesh electrode surface. The adsorption rate and electron transfer rate of the anatase TNTAs/Ti mesh electrode were twice that of the rutile TNTAs/Ti mesh electrode. Therefore, the anatase TNTAs/Ti mesh electrode exhibited excellent electrocatalytic activity toward the electrochemical removal of U(VI), which could work at a higher potential and significantly reduce the energy consumption of U(VI) removal. The U(VI) adsorption capacity on the anatase TNTAs/Ti mesh electrode was limited due to the low U(VI) concentration. However, the anatase TNTAs/Ti mesh electrode displayed a huge U(VI) removal capacity using the electroreduction method, where adsorption and reduction of U(VI) were mutually promoted and induced continuous accumulation of UO on the electrode. The accumulated UO can be easily recovered in dilute HNO, and the electrode can be used repeatedly.