Yong Loo Lin School of Medicine, National University of Singapore, Singapore, Singapore.
Division of Endocrine Surgery, University Surgical Cluster, National University Hospital, Singapore, Singapore.
J Ultrasound. 2023 Sep;26(3):643-651. doi: 10.1007/s40477-022-00698-9. Epub 2022 Sep 2.
Thyroid nodules are extremely common, with prevalence rate up to 68%, yet only 7-15% of these are malignant. Many nodules require surveillance and 2-dimensional ultrasound (2D US) is used. Issues include the huge workload of obtaining and labeling images and difficulty comparing sizes of nodules over time due to large inter-operator variability. Inaccuracies may result in unnecessary FNAC or missed diagnosis of malignant nodules.
We compared two techniques: freehand plain 2D US against freehand 2D US with gyroscopic guidance, both followed by 3D reconstruction using software. We measured the volume of nodules and a normal thyroid gland.
We found 2D US with gyroscopic guidance to be superior to plain 2D US as 3D reconstructions of greater accuracy are produced. The volume of the thyroid lobe measured 8.42 cm ± 0.94 was reasonably close to the normal average volume. However, the measured volume of the ellipsoidal nodule by the software is 8.69 cm ± 0.97 while the measured volume of the spherical nodule is 7.09 cm ± 0.79. As the expected volume of the nodules were 4.24cm and 4.19 cm respectively, the measured volume of the nodule was not accurate. The time taken to characterise nodules was reduced greatly from over 30 min in usual procedure to less than 10 min.
We find 3D US promising for evaluating size of thyroid nodules, with potential to study other TIRAD characteristics. Freehand 2D US with gyroscopic guidance shows the most promise for producing reliable, accurate and faster 3D reconstructions of thyroid nodules.
甲状腺结节极为常见,患病率高达 68%,但其中只有 7-15%是恶性的。许多结节需要进行监测,二维超声(2D US)被用于这一过程。存在的问题包括获取和标记图像的工作量巨大,以及由于操作者之间存在较大差异,很难比较随时间推移的结节大小。不准确可能导致不必要的细针穿刺抽吸活检(FNAC)或恶性结节的漏诊。
我们比较了两种技术:徒手 2D US 与徒手加陀螺导向 2D US,均使用软件进行 3D 重建。我们测量了结节和正常甲状腺的体积。
我们发现加陀螺导向的 2D US 优于普通 2D US,因为它产生的 3D 重建更精确。所测量的甲状腺叶体积为 8.42cm±0.94,与正常平均体积相当接近。然而,软件测量的椭圆形结节体积为 8.69cm±0.97,而球形结节体积为 7.09cm±0.79。由于预计结节的体积分别为 4.24cm 和 4.19cm,因此结节的测量体积并不准确。对结节进行特征描述的时间大大缩短,从通常程序中的 30 多分钟减少到不到 10 分钟。
我们发现 3D US 有望用于评估甲状腺结节的大小,并有潜力研究其他 TIRAD 特征。徒手加陀螺导向 2D US 有望更可靠、准确和快速地生成甲状腺结节的 3D 重建。