Quantitative Bio-Mapping of and Indicator Organisms at Different Stages in a Commercial Pork Processing Facility.

The purpose of this study was to develop a quantitative baseline of indicator organisms and Salmonella by bio-mapping throughout the processing chain from harvest to final product stages within a commercial conventional design pork processing establishment. Swab samples were taken on the harvest floor at different processing steps, gambrel table, after polisher, before final rinse, after the final rinse, post snap chill, and after peroxyacetic acid (PAA) application, while 2-pound product samples were collected for trim and ground samples. The samples were subjected to analysis for indicator microorganism enumeration, Aerobic Count (AC), Enterobacteriaceae (EB), and generic Escherichia coli (EC), with the BioMérieux TEMPO®. Salmonella prevalence and enumeration was evaluated using the BAX® System Real-Time Salmonella and the SalQuant™ methodology. Microbial counts were converted to Log Colony-forming units (CFU) on a per mL, per g or per sample basis, presented as LogCFU/mL, LogCFU/g and LogCFU/sample, prior to statistical analysis. All indicator microorganisms were significantly reduced at the harvest floor (p-value < 0.001), from gambrel table to after PAA cabinet location. The reduction at harvest was 2.27, 2.46 and 2.24 LogCFU/mL for AC, EB and EC, respectively. Trim sample values fluctuated based on cut, with the highest average AC count found at neck trim (2.83 LogCFU/g). Further process samples showed the highest AC count in sausage with a mean of 5.28 LogCFU/g. EB counts in sausage (3.19 LogCFU/g) showed an evident increase, compared to the reduction observed at the end of harvest and throughout trim processing. EC counts showed a similar trend to EB counts with the highest value found in sausage links (1.60 LogCFU/g). Statistical microbial process control (SPC) parameters were also developed for each of the indicator microorganisms, using the overall mean count (X=), the Lower control limit (LCL) and Upper control limit (UCL) at each sampling location. For Salmonella prevalence, a total of 125/650 samples were found positive (19%). From those positive samples, 47 samples (38%) were suitable for enumeration using the BAX® System SalQuant™, the majority detected at the gambrel table location. From those enumerable samples, 60% were estimated to be between 0.97 and 1.97 LogCFU/sample, while the rest (40%) were higher within the 2.00−4.02 LogCFU/sample range. This study provides evidence for the application of indicator and pathogen quantification methodologies for food safety management in commercial pork processing operations.