Ebrahimpour Elaheh, Kazemi Ali
Research and Development Department of Arvin Zist Pooya Lab, Tehran, Iran.
Department of Environmental Science and Engineering, Arak University, Arak, Iran.
Environ Sci Pollut Res Int. 2023 Jan;30(5):13605-13623. doi: 10.1007/s11356-022-23055-z. Epub 2022 Sep 22.
The abundant release of toxic heavy metals into wastewater has been a serious threat to human health, aquatic environments, plants, and animals; thus, it is critical to purify wastewater of these pollutants through a proper treatment process. A novel hydrogel compound was synthesized using partially hydrolyzed polyacrylamide (PHPAm) and functionalized FeO-coated magnetic nanoparticles (PHPAm/FeO@SiO-SH) that is efficient in removal of mercury and lead from wastewater. This new magnetic nanoadsorbent is characterized using scanning electron microscope, Fourier-transform infrared, thermogravimetric analysis, vibrating sample magnetometer, and energy-dispersive X-ray analysis. The central composite design under response surface methodology (CCD-RSM) was applied in designing the experiments to optimize the main parameters affecting the adsorption capacity: initial concentration (77.50 mg L), pH (6.11 and 6.48), adsorbent dosage (25 mg), and contact time (115 and 106 min) for both Hg and Pb adsorption, respectively. Quadratic models were used for variable predictions and analysis of variance was applied to evaluate the statistical parameters and investigate the interactions of the variables. The high determination coefficient (R 0.99) for both metals indicates a good correlation between actual and predicted response values. Additionally, thermodynamic modeling showed an endothermic and exothermic for Hg and Pb, respectively, and also the spontaneous nature of both metals' adsorption process within the temperature range of 288-318 K. Mercury and lead kinetic studies were in agreement with pseudo-second-order modeling, and the equilibrium results revealed that the Langmuir isotherm best fit the experimental data with maximum adsorption capacities of 256.41 and 227.27 (mg g) for Hg and Pb, respectively. Overall, PHPAm/FeO@SiO-SH is thought to have highly promising potential for investigating heavy metals in wastewater treatment, and will make important contributions to similar studies that may be conducted in the future.
有毒重金属大量排放到废水中,已对人类健康、水生环境、植物和动物构成严重威胁;因此,通过适当的处理工艺净化废水中的这些污染物至关重要。使用部分水解聚丙烯酰胺(PHPAm)和功能化的FeO包覆磁性纳米颗粒合成了一种新型水凝胶化合物(PHPAm/FeO@SiO-SH),该化合物对从废水中去除汞和铅具有高效性。使用扫描电子显微镜、傅里叶变换红外光谱、热重分析、振动样品磁强计和能量色散X射线分析对这种新型磁性纳米吸附剂进行了表征。采用响应面法(CCD-RSM)下的中心复合设计来设计实验,以优化影响吸附容量的主要参数:汞和铅吸附的初始浓度(分别为77.50 mg/L)、pH值(分别为6.11和6.48)、吸附剂用量(25 mg)以及接触时间(分别为115和106 min)。使用二次模型进行变量预测,并应用方差分析来评估统计参数并研究变量之间的相互作用。两种金属的高决定系数(R² = 0.99)表明实际响应值与预测响应值之间具有良好的相关性。此外,热力学模型表明汞和铅的吸附过程分别为吸热和放热过程,并且在288 - 318 K的温度范围内两种金属的吸附过程均为自发过程。汞和铅的动力学研究与伪二级模型一致,平衡结果表明朗缪尔等温线最适合实验数据,汞和铅的最大吸附容量分别为256.41和227.27(mg/g)。总体而言,PHPAm/FeO@SiO-SH被认为在废水处理中研究重金属具有极具前景的潜力,并将为未来可能进行的类似研究做出重要贡献。