Suppr超能文献

水相合成及具有生物活性和温敏性的 HA--ELP 生物缀合物的自组装。

Aqueous synthesis and self-assembly of bioactive and thermo-responsive HA--ELP bioconjugates.

机构信息

Université de Bordeaux, CNRS, Bordeaux INP, LCPO, UMR 5629, Pessac F-33600, France.

出版信息

Biomater Sci. 2022 Nov 8;10(22):6365-6376. doi: 10.1039/d2bm01149b.

Abstract

The design of synthetic (bio)macromolecules that combine biocompatibility, self-assembly and bioactivity properties at the molecular level is an intense field of research for biomedical applications such as (nano)medicine. In this contribution, we have designed and synthesized a library of bioactive and thermo-responsive bioconjugates from elastin-like polypeptides (ELPs) and hyaluronic acid (HA) in order to access bioactive self-assembled nanoparticles. These were prepared by a simple synthetic and purification strategy, compatible with the requirements for biological applications and industrial scale-up. A series of 9 HA--ELP bioconjugates with different compositions and block lengths was synthesized under aqueous conditions by strain-promoted azide-alkyne cycloaddition (SPAAC), avoiding the use of catalysts, co-reactants and organic solvents, and isolated by a simple centrifugation step. An extensive physico-chemical study was then performed on the whole library of bioconjugates in an attempt to establish structure-property relationships. In particular, the determination of the critical conditions for thermally driven self-assembly was carried out upon temperature (CMT) and concentration (CMC) gradients, leading to a phase diagram for each of these bioconjugates. These parameters and the size of nanoparticles were found to depend on the chemical composition of the bioconjugates, namely on the respective size of individual blocks. Understanding the mechanism underlying this dependency is a real asset for designing more effective experiments: with key criteria defined ( concentration, temperature, salinity, and biological target), the composition of the best candidates can be rationalized. In particular, four of the bioconjugates (HA-ELPn80 or n100 and HA-ELPn80 or n100) were found to self-assemble into well-defined spherical core-shell nanoparticles, with a negative surface charge due to the HA block exposed at the surface, a hydrodynamic diameter between 40 and 200 nm under physiological conditions and a good stability over time at 37 °C. We therefore propose here a versatile and simple design of smart, controllable, and bioactive nanoparticles that present different behaviors depending on the diblocks' composition.

摘要

设计在分子水平上结合生物相容性、自组装和生物活性特性的合成(生物)大分子是生物医学应用(如纳米医学)的一个研究热点。在本研究中,我们设计并合成了一系列弹性蛋白样多肽(ELP)和透明质酸(HA)的生物活性和温敏性生物缀合物库,以获得具有生物活性的自组装纳米颗粒。这些生物缀合物是通过一种简单的合成和纯化策略制备的,与生物应用和工业放大的要求兼容。在水相条件下,通过应变促进的叠氮-炔环加成(SPAAC)合成了一系列不同组成和嵌段长度的 9 种 HA-ELP 生物缀合物,避免了使用催化剂、共反应物和有机溶剂,并通过简单的离心步骤进行分离。然后对整个生物缀合物库进行了广泛的物理化学研究,试图建立结构-性质关系。特别是,通过温度(CMT)和浓度(CMC)梯度确定了热驱动自组装的临界条件,为每种生物缀合物绘制了相图。这些参数和纳米颗粒的大小取决于生物缀合物的化学组成,即各嵌段的相对大小。理解这种依赖性的机制对于设计更有效的实验非常有价值:定义了关键标准(浓度、温度、盐度和生物靶标)后,可以合理化最佳候选物的组成。特别是,四种生物缀合物(HA-ELPn80 或 n100 和 HA-ELPn80 或 n100)被发现自组装成具有明确球形核壳结构的纳米颗粒,由于表面暴露的 HA 嵌段,纳米颗粒表面带负电荷,在生理条件下的水动力学直径在 40nm 至 200nm 之间,在 37°C 下长时间保持良好的稳定性。因此,我们在这里提出了一种灵活且简单的智能、可控和生物活性纳米颗粒设计方法,这些纳米颗粒具有不同的行为,具体取决于二嵌段的组成。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验