Suppr超能文献

使用PIPER 6y在正面碰撞期间倾斜座椅中约束参数的影响。

Effects of restraint parameters using PIPER 6y in reclined seating during frontal impact.

作者信息

Bohman Katarina, El-Mobader Sarah, Jakobsson Lotta

机构信息

Volvo Car Corporation, Gothenburg, Sweden.

出版信息

Traffic Inj Prev. 2022;23(sup1):S123-S129. doi: 10.1080/15389588.2022.2125304. Epub 2022 Oct 10.

Abstract

OBJECTIVE

This study explores possible challenges for child occupants in reclined seating positions, applying current protection systems. Using PIPER 6 y in frontal impacts, the aim was to investigate the effect of restraint parameters in reclined seating positions, in addition to an upright position, varying booster design, shoulder belt outlet, and pretensioner activation.

METHOD

Eighteen full frontal impacts were simulated using the PIPER 6 y human body model restrained on a booster in a front passenger seat. The type of booster, pretensioner activation and shoulder belt outlet were varied with the vehicle seat in 'upright position' (25°) and 'reclined position' (40°). Three booster principles were used: booster seat (BoosterA), booster cushion (BoosterB) and representing properties of a vehicle built-in booster cushion (BoosterC). The two shoulder belt outlets include 'nominal D-ring' and 'rearward D-ring´.

RESULTS

Overall, activation of the pretensioner reduced the overall body displacement as well as the head and neck response in both seating positions. Submarining occurred only in the case of BoosterB in 'reclined position' without pretensioner. Some differences were observed for the lap belt interaction with pelvis in the non-submarining simulations. Greater pelvis displacement was observed in 'reclined position' as compared to 'upright position'. In both seating positions, greatest pelvis displacement was observed for BoosterB, due to relatively more forward initial lap belt position. While both provided favorable initial lap belt to pelvis contact, BoosterC offered more efficient lap belt restraint than BoosterA, since the lap belt remained lower on the pelvis and the vertical movement of the pelvis was more limited compared to BoosterA. When in 'reclined position', the 'rearward D-ring' position enabled earlier coupling of the torso due to initial shoulder belt to shoulder contact, resulting in lower head and neck responses as well as shorter head displacement compared to 'nominal D-ring'.

CONCLUSIONS

Submarining can be addressed in reclined seating positions using current booster design in combination with a seatbelt pretensioner. Lap belt routing was influenced by booster design and reclined seating, affecting the overall kinematics and responses of the PIPER 6 y. This study highlights the importance of including the whole context of child occupant protection when investigating reclined seating, such as the interaction and compatibility of booster, vehicle seat and seatbelt.

摘要

目的

本研究探讨使用当前保护系统时,儿童乘坐者处于倾斜座位姿势可能面临的挑战。利用PIPER 6岁儿童模型进行正面碰撞试验,目的是研究除直立姿势外,倾斜座位姿势下约束参数的影响,同时改变增高垫设计、肩带出口位置和预紧器激活情况。

方法

使用PIPER 6岁人体模型模拟18次完全正面碰撞,该模型安装在前排乘客座椅的增高垫上。增高垫类型、预紧器激活情况和肩带出口位置随车辆座椅处于“直立位置”(25°)和“倾斜位置”(40°)而变化。使用了三种增高垫原理:增高座椅(增高垫A)、增高坐垫(增高垫B)以及代表车辆内置增高坐垫特性的模型(增高垫C)。两个肩带出口位置包括“标称D环”和“向后D环”。

结果

总体而言,预紧器的激活减少了两个座位姿势下的整体身体位移以及头部和颈部的响应。只有在增高垫B处于“倾斜位置”且未激活预紧器的情况下才会发生下潜。在未发生下潜情况的模拟中,观察到腰带与骨盆的相互作用存在一些差异。与“直立位置”相比,“倾斜位置”观察到更大的骨盆位移。在两个座位姿势下,增高垫B的骨盆位移最大,这是因为初始腰带位置相对更靠前。虽然两者都能使腰带与骨盆良好初始接触,但增高垫C提供的腰带约束比增高垫A更有效,因为腰带在骨盆上的位置更低,与增高垫A相比,骨盆的垂直运动更受限制。当处于“倾斜位置”时,“向后D环”位置由于初始肩带与肩部接触,使躯干更早耦合,与“标称D环”相比,头部和颈部响应更低,头部位移更短。

结论

使用当前增高垫设计并结合安全带预紧器,可解决倾斜座位姿势下的下潜问题。腰带布置受增高垫设计和倾斜座位影响,进而影响PIPER 6岁儿童模型的整体运动学和响应。本研究强调了在研究倾斜座位时纳入儿童乘员保护整体背景的重要性,如增高垫、车辆座椅和安全带的相互作用及兼容性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验