Pomilovskis Ralfs, Mierina Inese, Beneš Hynek, Trhlíková Olga, Abolins Arnis, Fridrihsone Anda, Kirpluks Mikelis
Polymer Laboratory, Latvian State Institute of Wood Chemistry, Dzerbenes St. 27, LV-1006 Riga, Latvia.
Institute of Technology of Organic Chemistry, Faculty of Materials Science and Applied Chemistry, Riga Technical University, P. Valdena St. 3/7, LV-1048 Riga, Latvia.
Polymers (Basel). 2022 Sep 30;14(19):4107. doi: 10.3390/polym14194107.
In this study, the synthesis of a Michael donor compound from cellulose production by-products-tall oil fatty acids-was developed. The developed Michael donor compounds can be further used to obtain polymeric materials after nucleophilic polymerization through the Michael reaction. It can be a promising alternative method for conventional polyurethane materials, and the Michael addition polymerization reaction takes place under milder conditions than non-isocyanate polyurethane production technology, which requires high pressure, high temperature and a long reaction time. Different polyols, the precursors for Michael donor components, were synthesized from epoxidized tall oil fatty acids by an oxirane ring-opening and esterification reaction with different alcohols (trimethylolpropane and 1,4-butanediol). The addition of functional groups necessary for the Michael reaction was carried out by a transesterification reaction of polyol hydroxyl groups with -butyl acetoacetate ester. The following properties of the developed polyols and their acetoacetates were analyzed: hydroxyl value, acid value, moisture content and viscosity. The chemical structure was analyzed using Fourier transform infrared spectroscopy, gel permeation chromatography, size-exclusion chromatography and nuclear magnetic resonance. Matrix-assisted laser desorption/ionization analysis was used for structure identification for this type of acetoacetate for the first time.
在本研究中,开发了一种由纤维素生产副产物——妥尔油脂肪酸合成迈克尔供体化合物的方法。所开发的迈克尔供体化合物可在通过迈克尔反应进行亲核聚合后进一步用于获得聚合物材料。它可能是传统聚氨酯材料的一种有前景的替代方法,并且迈克尔加成聚合反应在比非异氰酸酯聚氨酯生产技术更温和的条件下进行,后者需要高压、高温和较长的反应时间。通过环氧氧化妥尔油脂肪酸与不同醇(三羟甲基丙烷和1,4 - 丁二醇)进行环氧乙烷开环和酯化反应,合成了不同的多元醇,它们是迈克尔供体组分的前体。通过多元醇羟基与乙酰乙酸丁酯进行酯交换反应,引入迈克尔反应所需的官能团。对所开发的多元醇及其乙酰乙酸酯的以下性质进行了分析:羟值、酸值、水分含量和粘度。使用傅里叶变换红外光谱、凝胶渗透色谱、尺寸排阻色谱和核磁共振对化学结构进行了分析。首次将基质辅助激光解吸/电离分析用于此类乙酰乙酸酯的结构鉴定。