Biogeochemistry Research Centre, University of Plymouth, Drakes Circus, Plymouth, UK.
DERAC Consultancy, Sucé-sur-Erdre, Nantes, France.
Integr Environ Assess Manag. 2023 Jul;19(4):1031-1047. doi: 10.1002/ieam.4700. Epub 2022 Dec 1.
Chemical contamination from point source discharges in developed (resource-rich) countries has been widely regulated and studied for decades; however, diffuse sources are largely unregulated and widespread. In the European Union (EU), large dischargers report releases of some chemicals, yet little is known of total emissions (point and diffuse) and their relative significance. We estimated copper loadings from all significant sources including industry, sewage treatment plants, surface runoff (from traffic, architecture, and atmospheric deposition), septic tanks, agriculture, mariculture, marine transport (antifoulant leaching), and natural processes. A combination of European datasets, literature, and industry data were used to generate export coefficients. These were then multiplied by activity rates to derive loads. A total of approximately 8 kt of copper per annum (ktpa) is estimated to enter freshwaters in the EU, and another 3.5 ktpa enters transitional and coastal waters. The main inputs to freshwater are natural processes (3.7 ktpa), agriculture (1.8 ktpa), and runoff (1.8 ktpa). Agricultural emissions are dominated by copper-based plant protection products and farmyard manure. Urban runoff is influenced by copper use in architecture and by vehicle brake linings. Antifoulant leaching from boats (3.2 ktpa) dominates saline water loads of copper. It is noteworthy that most of the emissions originate in a limited number of copper uses where environmental exposure and pathways exist, compared with the bulk of copper use within electrical and electronic equipment and infrastructure that has no environmental pathway during its use. A sensitivity analysis indicated significant uncertainty in data from abandoned mines and urban runoff load estimates. This study provided for the first time a methodology and comprehensive metal load apportionment to European aquatic systems, identifying data gaps and uncertainties, which may be refined over time. Source apportionments using this methodology can inform more cost-effective environmental risk assessment and management. Integr Environ Assess Manag 2023;19:1031-1047. © 2022 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).
从发达国家(资源丰富的国家)的点源排放物中产生的化学污染已经得到了广泛的监管和研究,已经有数十年的历史了;然而,弥散源基本上没有受到监管,而且分布广泛。在欧盟(EU),大型排放源报告了一些化学物质的排放情况,但对于总排放量(点源和弥散源)及其相对重要性知之甚少。我们估算了包括工业、污水处理厂、地表径流(来自交通、建筑和大气沉降)、化粪池、农业、海水养殖、海洋运输(防污剂浸出)和自然过程在内的所有重要来源的铜负荷。我们使用了欧洲数据集、文献和行业数据的组合来生成排放系数。然后,将这些排放系数乘以活动率,得出负荷。估计每年有大约 8 千吨铜(ktpa)进入欧盟的淡水,另有 3.5 千吨铜进入过渡水和沿海水域。进入淡水的主要输入物是自然过程(3.7 ktpa)、农业(1.8 ktpa)和径流(1.8 ktpa)。农业排放物主要由含铜的植物保护产品和农家肥组成。城市径流受到建筑中铜的使用和车辆刹车片的影响。来自船只的防污剂浸出(3.2 ktpa)主导着铜在咸水系统中的负荷。值得注意的是,与在使用过程中没有环境途径的电气和电子设备和基础设施中的大部分铜使用相比,大多数排放物都源自少数几种存在环境暴露和途径的铜用途。敏感性分析表明,废弃矿山和城市径流负荷估算的数据存在较大不确定性。本研究首次提供了一种方法和对欧洲水生系统的全面金属负荷分配,确定了数据差距和不确定性,这些差距和不确定性可能会随着时间的推移而得到完善。使用这种方法进行的源分配可以为更具成本效益的环境风险评估和管理提供信息。2023 年《综合环境评估与管理》第 19 卷:1031-1047 页。© 2022 作者。综合环境评估与管理由 Wiley 期刊 LLC 代表环境毒理与化学学会(SETAC)出版。