Osmotherly Peter Grant, Cowin Gary J, Rivett Darren A
School of Health Sciences, The University of Newcastle, Callaghan, Australia.
Centre For Advanced Imaging, The University of Queensland, Brisbane, Australia.
J Craniovertebr Junction Spine. 2022 Jul-Sep;13(3):309-317. doi: 10.4103/jcvjs.jcvjs_62_22. Epub 2022 Sep 14.
Descriptions of the radiological appearance of the craniovertebral ligaments often lack detail. This study aimed to provide an accurate description of the morphology and radiological appearance of the alar and cruciform ligaments with confirmation of findings by fine dissection.
Six embalmed human cadaveric specimens were reduced to an osseoligamentous arrangement spanning the C2/3 disc to the occiput. Specimens were imaged on a 4.6T Bruker magnetic resonance (MR) system using a 3D RARE multiple SE sequence with acquisition time 18 h 24 min. Acquired images were viewed in three planes, and detailed descriptions and morphometric measurement of the ligaments were obtained. Specimens were then examined and described using fine dissection. Direct comparison of the descriptions of each method was undertaken.
From imaging, detailed features of all alar ligaments could be identified in all specimens. Consistency in shape, orientation, and attachments is described. Attachment to the medial aspect of the atlantooccipital joints was evident in all specimens. Five of six alar ligament pairs contained fibers that traversed the dens without attachment. Ascending cruciform ligaments could be clearly identified in four of six specimens. No descending cruciform ligaments could be clearly delineated. Detailed features of the transverse ligaments could be identified and described in all planes. Dissection findings were mostly consistent with descriptions obtained from MR images.
4.6T MR images provide accurate detail of the structure, dimensions, and attachments of the craniovertebral ligaments. The morphology of the craniovertebral ligaments assessed radiologically was consistent with findings on gross dissection.
关于颅颈韧带放射学表现的描述往往缺乏细节。本研究旨在准确描述翼状韧带和十字形韧带的形态及放射学表现,并通过精细解剖来证实研究结果。
六具经过防腐处理的人体尸体标本被处理成跨越C2/3椎间盘至枕骨的骨韧带结构。使用3D RARE多自旋回波序列,采集时间为18小时24分钟,在4.6T布鲁克磁共振(MR)系统上对标本进行成像。在三个平面上观察所采集的图像,并对韧带进行详细描述和形态测量。然后通过精细解剖对标本进行检查和描述。对每种方法的描述进行直接比较。
通过成像,在所有标本中均可识别出所有翼状韧带的详细特征。描述了其形状、方向和附着点的一致性。在所有标本中均可见其附着于寰枕关节的内侧。六对翼状韧带中有五对包含穿过齿突但未附着的纤维。在六个标本中有四个可清晰识别出上十字韧带。未清晰勾勒出下十字韧带。在所有平面上均可识别并描述横韧带的详细特征。解剖结果大多与从MR图像获得的描述一致。
4.6T MR图像可提供颅颈韧带结构、尺寸和附着点的准确细节。通过放射学评估的颅颈韧带形态与大体解剖结果一致。