Galkin Nikolay G, Goroshko Dmitrii L, Tkachenko Ivan A, Samardak Aleksey Yu, Galkin Konstantin N, Subbotin Evgenii Yu, Dotsenko Sergei A, Migas Dmitry B, Gutakovskii Anton K
Laboratory of Optics and Electrophysics, Institute of Automation and Control Processes, FEB RAS, Radio Str. 5, 690041 Vladivostok, Russia.
Laboratory of Chemical Radiospectroscopy, Institute of Chemistry, FEB RAS, Pr. 100th Anniversary of Vladivostok, 159, 690022 Vladivostok, Russia.
Nanomaterials (Basel). 2022 Oct 21;12(20):3707. doi: 10.3390/nano12203707.
In this study, the appearance of magnetic moments and ferromagnetism in nanostructures of non-magnetic materials based on silicon and transition metals (such as iron) was considered experimentally and theoretically. An analysis of the related literature shows that for a monolayer iron coating on a vicinal silicon surface with (111) orientation after solid-phase annealing at 450-550 °C, self-ordered two-dimensional islands of α-FeSi displaying superparamagnetic properties are formed. We studied the transition to ferromagnetic properties in a system of α-FeSi nanorods (NRs) in the temperature range of 2-300 K with an increase in the iron coverage to 5.22 monolayers. The structure of the NRs was verified along with distortions in their lattice parameters due to heteroepitaxial growth. The formation of single-domain grains in α-FeSi NRs with a cross-section of 6.6 × 30 nm was confirmed by low-temperature and field studies and FORC (first-order magnetization reversal curves) diagrams. A mechanism for maintaining ferromagnetic properties is proposed. Ab initio calculations in freestanding α-FeSi nanowires revealed the formation of magnetic moments for some surface Fe atoms only at specific facets. The difference in the averaged magnetic moments between theory and experiments can confirm the presence of possible contributions from defects on the surface of the NRs and in the bulk of the α-FeSi NR crystal lattice. The formed α-FeSi NRs with ferromagnetic properties up to 300 K are crucial for spintronic device development within planar silicon technology.
在本研究中,从实验和理论两方面对基于硅和过渡金属(如铁)的非磁性材料纳米结构中磁矩和铁磁性的出现进行了研究。对相关文献的分析表明,在450 - 550°C进行固相退火后,在具有(111)取向的近邻硅表面上的单层铁涂层会形成显示超顺磁特性的α-FeSi自有序二维岛。我们研究了在2 - 300 K温度范围内,随着铁覆盖率增加至5.22单层,α-FeSi纳米棒(NRs)系统向铁磁特性的转变。验证了NRs的结构以及由于异质外延生长导致的晶格参数畸变。通过低温和磁场研究以及一阶磁化反转曲线(FORC)图证实了横截面为6.6×30 nm的α-FeSi NRs中单畴晶粒的形成。提出了一种维持铁磁特性的机制。对独立的α-FeSi纳米线进行的从头算计算表明,仅在特定晶面的一些表面Fe原子处形成了磁矩。理论和实验之间平均磁矩的差异可以证实NRs表面和α-FeSi NR晶格主体中缺陷可能产生的贡献。所形成的在高达300 K时具有铁磁特性的α-FeSi NRs对于平面硅技术中的自旋电子器件开发至关重要。