Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan, USA; Biomedical Engineering Department, Peking University, Beijing, China.
Department of Obstetrics and Gynecology, University of Michigan, Ann Arbor, Michigan, USA.
J Mech Behav Biomed Mater. 2023 Jan;137:105544. doi: 10.1016/j.jmbbm.2022.105544. Epub 2022 Oct 29.
The uterine suspensory tissue (UST) complex includes the cardinal (CL) and uterosacral "ligaments" (USL), which are mesentery-like structures that play a role in resisting pelvic organ prolapse (POP). Since there is no information on the time-dependent material properties of the whole structure in situ and in vivo, we developed and tested an intraoperative technique to quantify in vivo whether there is a significant difference in visco-hyperelastic behavior of the CL and USL between women with and without POP. Thirteen women with POP (cases) and four controls scheduled for surgery were selected from an ongoing POP study. Immediately prior to surgery, a computer-controlled linear servo-actuator with a series force transducer applied a continuous, caudally directed traction force while simultaneously recording the resulting cervical displacement in the same direction. After applying an initial 1.1 N preload, a ramp rate of 4 mm/s was used to apply a maximum force of 17.8 N in three "ramp-and-hold" test trials. A simplified bilateral four-cable biomechanical model was used to identify the material behavior of each ligament. For this, the initial cross-section areas of the CL and USL were measured on 3-T magnetic resonance image-based 3D models from each subject. The time-dependent strain energy function of CL/USL was defined with a three-parameter hyperelastic Mooney-Rivlin material model and a two-term Prony series in relaxation form. When cases were compared with controls, the estimated time-dependent material constants of CL and USL did not differ significantly. These are the first measurements that compare the in vivo and in situ visco-hyperelastic response of the tissues comprising the CL and USL to loading in women with and without prolapse. Larger sample sizes would help improve the precision of intergroup differences.
子宫悬韧带组织(UST)复合体包括子宫角(CL)和子宫骶骨“韧带”(USL),它们是类似于系膜的结构,在抵抗盆腔器官脱垂(POP)方面发挥作用。由于没有关于原位和体内整个结构的时变材料特性的信息,我们开发并测试了一种术中技术,以量化是否存在 POP 患者和非 POP 患者之间 CL 和 USL 的粘弹性行为的显著差异。从正在进行的 POP 研究中选择了 13 名患有 POP(病例)和 4 名接受手术的对照组妇女。在手术前,计算机控制的线性伺服致动器带有串联力传感器施加连续的尾向牵引力,同时记录相同方向的宫颈位移。在施加初始 1.1 N 预载后,使用 4 mm/s 的斜坡速率在三个“斜坡和保持”测试试验中施加最大 17.8 N 的力。使用简化的双侧四线生物力学模型来确定每个韧带的材料行为。为此,在每个受试者的基于 3-T 磁共振成像的 3D 模型上测量 CL 和 USL 的初始横截面面积。CL/USL 的时变应变能函数通过具有三参数超弹性 Mooney-Rivlin 材料模型和松弛形式的两参数 Prony 级数来定义。当将病例与对照组进行比较时,CL 和 USL 的估计时变材料常数没有显著差异。这些是首次比较有无脱垂女性 CL 和 USL 组成组织的体内和原位粘弹性响应的测量值。更大的样本量将有助于提高组间差异的精度。