Suppr超能文献

用于关节内矫正性切开术的腕掌关节、掌骨和指间关节的 3D 规划和患者专用器械。

3D planning and patient specific instrumentation for intraarticular corrective osteotomy of trapeziometacarpal-, metacarpal and finger joints.

机构信息

Department of Orthopedics, Balgrist University Hospital, University of Zurich, 8008, Zurich, Switzerland.

Department of Hand Surgery, Balgrist University Hospital, University of Zurich, 8008, Zurich, Switzerland.

出版信息

BMC Musculoskelet Disord. 2022 Nov 8;23(1):965. doi: 10.1186/s12891-022-05946-x.

Abstract

BACKGROUND

Intra-articular malunions of the finger can lead to deformity and loss of function and can be treated with intra-articular corrective osteotomies. The aim of this study was to evaluate radiographic joint congruency, feasibility and functional outcome of three-dimensional (3D) printed patient-specific instrumentation (PSI) for corrective osteotomies at the trapeziometacarpal and finger joints.

METHODS

Computer-tomography (CT) scans were acquired preoperatively for standard 3D planning, which was followed by calculation of cutting planes and the design of individualized bone surface contact drilling, sawing and reposition guides. Follow-up CT scans and clinical examinations (range of motion, grip strength) were performed. Postoperative complications were documented and patient-reported outcome measurements were assessed (Single Assessment Numeric Evaluation (SANE) score, brief Michigan Hand Questionnaire (MHQ)).

RESULTS

Ten patients (mean age 28.4 ± 12.8,range 13.8-51.3) years) were included with a mean follow-up of 21 ± 18 (3-59) months including seven osteotomies at the trapeziometacarpal or metacarpophalangeal joints and three at the proximal interphalangeal joint (PIP). All radiographic follow-up examinations showed the planned correction with good joint congruency and regular osseous consolidation. At the latest follow-up, the range of motion (ROM) increased and the average grip strength recovered to the level of the contralateral side. No postoperative complication was detected. The mean SANE score improved from 44 ± 23 (0-70) to 82 ± 12 (60-90) after a mean of 72 ± 20 (44-114) months. The mean postoperative brief MHQ was 92 ± 8 (71-98).

CONCLUSION

The use of 3D PSI in treating intra-articular malunions at the trapeziometacarpal and finger joints restored articular congruency accurately. ROM and grip strength improved postoperatively comparable to the healthy contralateral side and patient-reported outcome measures improved after medium-term follow-up.

摘要

背景

手指关节内的畸形愈合会导致畸形和功能丧失,可以通过关节内矫正截骨术进行治疗。本研究旨在评估三维(3D)打印患者特异性器械(PSI)在治疗腕掌关节和手指关节内畸形愈合中的放射学关节吻合度、可行性和功能结果。

方法

术前采集计算机断层扫描(CT)扫描进行标准 3D 规划,然后计算切割平面并设计个体化骨面接触钻孔、锯切和复位引导。进行术后 CT 扫描和临床检查(活动范围、握力)。记录术后并发症并评估患者报告的结果测量(单一评估数字评估(SANE)评分、简要密歇根手问卷(MHQ))。

结果

纳入 10 例患者(平均年龄 28.4±12.8 岁,范围 13.8-51.3 岁),平均随访 21±18(3-59)个月,包括 7 例腕掌关节或掌指关节和 3 例近节指间关节(PIP)截骨术。所有影像学随访检查均显示计划矫正后关节吻合良好,骨愈合规则。在最近的随访中,活动范围(ROM)增加,平均握力恢复到对侧水平。未发现术后并发症。平均 SANE 评分从 44±23(0-70)提高到 82±12(60-90),平均 72±20(44-114)个月后。平均术后简要 MHQ 为 92±8(71-98)。

结论

在治疗腕掌关节和手指关节内畸形愈合时,使用 3D PSI 可准确恢复关节吻合度。术后 ROM 和握力与健侧相比有明显改善,中期随访后患者报告的结果测量值有所改善。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/2d3e/9641882/a10329ccef52/12891_2022_5946_Fig1_HTML.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验