Suppr超能文献

层状双氢氧化物是如何演变的?对其合成过程的初步见解。

How do layered double hydroxides evolve? First insights into their synthesis processes.

作者信息

Doungmo G, Morais A F, Mustafa D, Kamgaing T, Njanja E, Etter M, Tonlé I K, Terraschke H

机构信息

Institut für Anorganische Chemie, Christian-Albrechts-Universität zu Kiel Max Eyth-Str. 2 24118 Kiel Germany

Research Unit of Noxious Chemistry and Environmental Engineering, Department of Chemistry, Faculty of Science University of Dschang P.O. Box 67 Dschang Cameroon

出版信息

RSC Adv. 2022 Nov 22;12(52):33469-33478. doi: 10.1039/d2ra05269e.

Abstract

Despite the importance of layered double hydroxides (LDHs) in catalysis, medicine and water treatment, the crystallisation process of these materials is seldom investigated. In this study, characterisation techniques granted unprecedented experimental access to the formation dynamics of carbonate-intercalated Mg/Al LDHs as model system when applying the most relevant co-precipitation approaches by exploring the effects of temperature and concentration of reactants. For this purpose, a combinatorial multi-modal characterisation approach was applied involving measurements of pH, ion conductivity and light scattering, as well as synchrotron-based X-ray diffraction (XRD). Shortly after beginning the addition of basic solutions (, sodium carbonate and sodium hydroxide) to the solutions of magnesium nitrate hexahydrate and aluminium nitrate nonahydrate, a stable pH was reached due to the uptake of hydroxyl ions for nuclei formation. Shortly after, crystal growth phase was detected by an increase in the light scattering signal and confirmed XRD. Increasing the concentration of reactants accelerated the onset of crystal growth by 70% without significantly changing the crystallite size. On the other hand, increasing the temperature up to 65 °C showed a smaller influence on the reaction kinetics but resulted in a two-fold increase in crystallite size. Adding the solution of metal precursors to the basic solution, saturation was rapidly reached, without an induction period, favouring the formation of very small crystallites of approximately 10 nm.

摘要

尽管层状双氢氧化物(LDHs)在催化、医学和水处理中具有重要意义,但这些材料的结晶过程却很少被研究。在本研究中,通过探索反应物温度和浓度的影响,当应用最相关的共沉淀方法时,表征技术为碳酸根插层的Mg/Al LDHs作为模型系统的形成动力学提供了前所未有的实验途径。为此,应用了一种组合多模态表征方法,包括测量pH值、离子电导率和光散射,以及基于同步加速器的X射线衍射(XRD)。在开始向六水合硝酸镁和九水合硝酸铝溶液中添加碱性溶液(碳酸钠和氢氧化钠)后不久,由于羟基离子被用于成核,pH值达到稳定。不久之后,通过光散射信号的增加检测到晶体生长阶段,并通过XRD得到证实。增加反应物浓度可使晶体生长的起始加速70%,而微晶尺寸没有显著变化。另一方面,将温度提高到65°C对反应动力学的影响较小,但微晶尺寸增加了两倍。将金属前驱体溶液加入碱性溶液中,很快达到饱和,没有诱导期,有利于形成约10nm的非常小的微晶。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/d7c2/9680006/0c5f2fdce64b/d2ra05269e-f1.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验