Shichman Ittai, Somerville Lyndsay, Lutes William B, Jones Stephen A, McCalden Richard, Schwarzkopf Ran
Department of Orthopedic Surgery, NYU Langone Health, New York, NY, 10010, USA.
Division of Orthopedic Surgery, Sourasky Medical Center, Sackler School of Medicine, Tel-Aviv University, 6423906, Tel-Aviv, Israel.
Arthroplasty. 2022 Dec 2;4(1):51. doi: 10.1186/s42836-022-00152-5.
A novel fully porous acetabular titanium shell has been designed to reduce stiffness mismatch between bone and implant and promote osseointegration in complex (cTHA) and revision total hip arthroplasty (rTHA). A highly cross-linked polyethylene (XLPE) liner is cemented within the cup to reduce wear rates and increase survivorship. This study reported the outcomes of an XLPE liner cemented into a novel 3D-printed fully porous cup in cTHA and rTHA.
Presented was a multicenter retrospective review of 40 patients (6 cTHA and 34 rTHA) who underwent THA with a fully porous titanium acetabular cup and cemented XLPE liner. Data were collected on demographics, surgical information, outcomes, including osseointegration and migration and implant survivorship.
On average, patients were 71.42 ± 9.97 years old and obese (BMI: 30.36 ± 6.88 kg/m) and were followed up for a mean time of 2.21 ± 0.77 years. Six patients underwent cTHA and 34 patients underwent rTHA. The mean hospital length of stay was 5.34 ± 3.34 days. Three (7.5%) 90-day readmissions were noted. Harris Hip Scores improved, on average, from 53.87 ± 12.58 preoperatively to 83.53 ± 12.15 postoperatively (P<0.001). One case of acetabular shell aspetic loosening with migration was noted. Thirty-nine of the 40 acetabular components were fully osseointegrated without migration. Two patients underwent re-revision surgery for PJI and one patient received acetabular shell+liner re-revision due to aseptic loosening. Kaplan-Meier analysis showed an all-cause revision-free survival rate of 95.0% at 6 months and 1 year, and 92.0% at 4-years. Aseptic acetabular cup, liner dislocation/loosening, and fracture-free survival was 100% at 6 months and 1-year, and 97.1% at 2 years.
The combined use of a novel 3D-printed fully porous titanium acetabular shell and cemented XLPE acetabular liner yielded excellent rates of osseointegration, and all-cause and acetabular aseptic loosening survivorship at a minimum 1-year follow-up. Further long-term studies are needed to assess the longevity of this construct.
一种新型全多孔髋臼钛壳已被设计出来,以减少骨与植入物之间的刚度不匹配,并促进复杂全髋关节置换术(cTHA)和翻修全髋关节置换术(rTHA)中的骨整合。一种高度交联聚乙烯(XLPE)衬垫被粘结在髋臼杯内,以降低磨损率并提高生存率。本研究报告了在cTHA和rTHA中,将XLPE衬垫粘结到新型3D打印全多孔髋臼杯中的结果。
对40例患者(6例cTHA和34例rTHA)进行了多中心回顾性研究,这些患者接受了使用全多孔钛髋臼杯和粘结XLPE衬垫的THA。收集了有关人口统计学、手术信息、结果的数据,包括骨整合、移位和植入物生存率。
患者平均年龄为71.42±9.97岁,且为肥胖患者(BMI:30.36±6.88kg/m²),平均随访时间为2.21±0.77年。6例患者接受了cTHA,34例患者接受了rTHA。平均住院时间为5.34±3.34天。记录到3例(7.5%)90天再次入院情况。Harris髋关节评分平均从术前的53.87±12.58提高到术后的83.53±12.15(P<0.001)。记录到1例髋臼壳无菌性松动伴移位。40个髋臼组件中有39个完全骨整合且无移位。2例患者因假体周围感染性关节炎接受了再次翻修手术,1例患者因无菌性松动接受了髋臼壳+衬垫再次翻修。Kaplan-Meier分析显示,6个月和1年时全因无翻修生存率为95.0%,4年时为92.0%。无菌性髋臼杯、衬垫脱位/松动和无骨折生存率在6个月和1年时为100%,2年时为97.1%。
新型3D打印全多孔钛髋臼壳和粘结XLPE髋臼衬垫的联合使用,在至少1年的随访中产生了优异的骨整合率、全因和髋臼无菌性松动生存率。需要进一步的长期研究来评估这种结构的长期效果。