Department of Agricultural Processing and Food Engineering, College of Agricultural Engineering and Technology, O.U.A.T., Bhubaneswar, Odisha, India.
Department of Food Process Engineering, National Institute of Technology Rourkela, Sundergarh, Odisha, India.
J Food Sci. 2023 Mar;88(3):926-941. doi: 10.1111/1750-3841.16465. Epub 2023 Jan 27.
Jackfruit (Artocarpus heterophyllus) production is abundant during the summer season in Southeast Asia and is also produced throughout the year in some parts of South India. Attributed to the absence of viable process technology, the pulp is predominantly consumed fresh and has not been used effectively for other applications such as in ice cream, beverages, custard preparations, or as a flavor enhancer. The conversion of the high sugar-containing pulp to powder is difficult. Hence, the foam-mat drying of jackfruit pulp was carried out using different foaming agents and stabilizers. The effect of maltodextrin (MD; 3%, 4%, and 5% w/w), glycerol-monostearate (GMS; 2%, 3%, and 4% w/w), or soy protein (SP; 0.5%, 1%, and 1.5% w/w), and 0.5% methylcellulose added to the pulp at a concentration of 8 °Brix on foam expansion (FE; %), foam retention (FR; %), total carotenoids (TC; mg/100 g pulp), and overall acceptability (OA) were investigated, and their levels were optimized using central composite design of response surface methodology. The foam mats were dried at a drying air temperature of 70°C along with a foam thickness of 4 mm. The samples were evaluated based on drying time, foaming, functional, biochemical, and sensory qualities. The optimum levels of MD and GMS were 3.96% (4.0%) and 3.01% (3.0%), respectively, which led to the foam-mat-dried jackfruit powder with properties within the desirable range. At these optimum conditions, the predicted FE, FR, TC, and OA were 69.84%, 89.42%, 0.152 mg/100 g pulp, and 7.73, respectively. The optimum levels of MD and SP were 3.95% (4.0%) and 1.02% (1.0%), respectively, and the corresponding properties (considered as responses) of this foam-mat-dried jackfruit powder such as FE, FR, TC, and OA were 74.45%, 84.80%, 0.14 mg/100 g pulp, and 7.6, respectively. PRACTICAL APPLICATION: This study is one of the few studies that is focused on the development of a technique for the long-term preservation of jackfruit powder for further applications that will also reduce the wastage of jackfruit attributed to its fast perishability. This technology can be replicated in other parts of the world. This article has demonstrated foam-mat drying as a useful technique to achieve high-quality jackfruit pulp powders with desirable drying, foaming, functional, biochemical, and sensory qualities using different foaming agents and stabilizers.
菠萝蜜(Artocarpus heterophyllus)在东南亚的夏季大量生产,在印度南部的一些地区也全年生产。由于缺乏可行的加工技术,果肉主要是新鲜食用的,并没有有效地用于冰淇淋、饮料、奶油冻制剂等其他应用,也没有用作增味剂。将高含糖量的果肉转化为粉末很困难。因此,采用不同的发泡剂和稳定剂对菠萝蜜果肉进行泡沫垫干燥。研究了麦芽糊精(MD;3%、4%和 5%w/w)、甘油单硬脂酸酯(GMS;2%、3%和 4%w/w)或大豆蛋白(SP;0.5%、1%和 1.5%w/w)以及添加到 8°Brix 浓度果肉中的 0.5%甲基纤维素对泡沫膨胀(FE;%)、泡沫保留(FR;%)、总类胡萝卜素(TC;mg/100 g 果肉)和整体可接受性(OA)的影响,并使用响应面法的中心复合设计优化了它们的水平。泡沫垫在 70°C 的干燥空气温度下以及 4 mm 的泡沫厚度下进行干燥。根据干燥时间、发泡、功能、生化和感官质量对样品进行评估。MD 和 GMS 的最佳水平分别为 3.96%(4.0%)和 3.01%(3.0%),这导致了具有理想范围内特性的泡沫垫干燥菠萝蜜粉末。在这些最佳条件下,预测的 FE、FR、TC 和 OA 分别为 69.84%、89.42%、0.152mg/100g 果肉和 7.73。MD 和 SP 的最佳水平分别为 3.95%(4.0%)和 1.02%(1.0%),这种泡沫垫干燥菠萝蜜粉末的相应特性(视为响应),如 FE、FR、TC 和 OA,分别为 74.45%、84.80%、0.14mg/100g 果肉和 7.6。实际应用:这项研究是为数不多的专注于开发长期保存菠萝蜜粉技术的研究之一,这也将减少由于菠萝蜜快速变质而造成的浪费。这项技术可以在世界其他地区复制。本文展示了泡沫垫干燥作为一种有用的技术,可以使用不同的发泡剂和稳定剂获得具有理想干燥、发泡、功能、生化和感官特性的高质量菠萝蜜果肉粉末。