Evaluation of cutting efficiency and thermal damage during soft tissue surgery with 940 nm-diode laser: An ex vivo study.

OBJECTIVES

To investigate quantitatively the cutting efficiency and the thermal effects in the surrounding soft tissues of incisions that are induced by a 940 nm-diode laser with different power settings.

MATERIALS AND METHODS

Fifty-four gingival samples were prepared from the lower jaws of freshly slaughtered German-land race pigs and were randomly divided into 9 groups (n = 6) according to the adjusted output power (1, 1.5, 2, 2.5, 3, 3.5, 4, 5 and 6 W). Five incisions were implemented for each sample using a diode laser (940 nm) in continuous wave with an initiated tip resulting in 30 incisions for each experimental group utilizing a three-dimensional computer-controlled micropositioner. The samples were prepared for histometric evaluation using a transmitted light microscope. The cutting depth and width and the thermal damage were recorded for each sample and the efficiency factor γ was calculated.

RESULTS

The highest cutting efficiency (γ  = 0.81 ± 0.03) exhibited the group with 5 W output power (p < 0.05), while the lowest (γ  = 0.45 ± 0.11) showed the 1-W group (p < 0.05). Over 3.5 W there was a rapid increase in the size of thermal damage of the incisions, especially for 6 W, which presented the largest.

CONCLUSIONS

The most effective power parameters of diode laser (940 nm) for soft tissue surgery were from 3 to 5 W. The outcomes of the current study may help to establish clinical protocols for the use of diode lasers (940 nm) in soft tissue surgery in contact mode assisting dental professionals to achieve optimal clinical results and avoid complications.