Jabara Justin T, Only Arthur J, Paull T Zach, Wise Kelsey L, Swiontkowski Marc F, Nguyen Mai P
Department of Orthopaedic Surgery, University of Minnesota, Minneapolis, Minnesota.
Department of Orthopaedic Surgery, TRIA Orthopedic Center, Bloomington, Minnesota.
JBJS Essent Surg Tech. 2022 Jun 1;12(2). doi: 10.2106/JBJS.ST.21.00026. eCollection 2022 Apr-Jun.
Tibial plateau fractures account for approximately 1% to 2% of fractures in adults. These fractures exhibit a bimodal distribution as high-energy fractures in young patients and low-energy fragility fractures in elderly patients. The goal of operative treatment is restoration of joint stability, limb alignment, and articular surface congruity while minimizing complications such as stiffness, infection, and posttraumatic osteoarthritis. Open reduction and internal fixation with direct visualization of the articular reduction or indirect evaluation with fluoroscopy has traditionally been the standard treatment for displaced tibial plateau fractures. However, there has been concern regarding inadequate visualization of the articular surface with open tibial plateau fracture fixation, contributing to a fivefold increase in conversion to total knee arthroplasty. In addition, the risk of wound complications and infection has been reported to be as high as 12%. Knee arthroscopy with percutaneous, cannulated screw fixation provides a less invasive procedure with excellent visualization of the articular surface and allows for accurate reduction and fracture fixation compared with traditional open reduction and internal fixation techniques. Recent studies of arthroscopically assisted percutaneous screw fixation of tibial plateau fractures have reported excellent early clinical and radiographic outcomes and low complication rates.
This technique involves the use of both arthroscopy and fluoroscopy to facilitate reduction and fixation of the tibial plateau fracture. Through a minimally invasive technique, the depressed articular joint surface is targeted with use of preoperative computed tomography (CT) scans and intraoperative biplanar fluoroscopy. Reduction is then directly visualized with arthroscopy and fixation is performed with use of fluoroscopy. Lastly, restoration of the articular surface is confirmed with use of arthroscopy after definitive fixation. Modifications can be made as needed.
The traditional method for fixation of displaced tibial plateau fractures is open reduction and internal fixation. Articular reduction can be visualized directly with an open submeniscal arthrotomy and an ipsilateral femoral distractor or indirectly with fluoroscopy.
Visualization of the articular surface is essential to achieve anatomic reduction of the joint line. Inspection of the posterior plateau is difficult with an open surgical approach. Arthroscopically assisted percutaneous screw fixation of a tibial plateau fracture may allow for improved restoration of articular surfaces through enhanced visualization. Less soft-tissue dissection is associated with lower morbidity and may result in less damage to the blood supply, lower rates of infection and wound complications, faster healing, and better mobility for patients. In our experience, this technique has been successful in patients with severe osteoporosis and comminution of depressed fragments. If total knee arthroplasty is required, we have also observed less damage to the blood supply and fewer surgical scars with use of this surgical technique.
Arthroscopically assisted percutaneous screw fixation of a tibial plateau fracture facilitates anatomical reduction through a less invasive approach. Patients undergoing this method of tibial plateau fracture fixation are able to engage earlier in rehabilitation. Studies have shown early postoperative range of motion, excellent patient-reported outcomes, and minimal complications.
Arthroscopically assisted fixation can be applied to a variety of tibial plateau fractures; however, the minimally invasive approach is best suited for patients with isolated lateral tibial plateau fractures (Schatzker I to III) and a cortical envelope that can be easily restored. The cortical envelope refers to the outer rim of the tibial plateau. Fracture pattern and ligamentotaxis determine the cortical envelope, which can be evaluated on preoperative CT scans. In our experience, even depressed segments with a high degree of comminution may be treated with use of this technique with satisfactory results.Articular depression should be targeted with use of a preoperative CT scan and intraoperative fluoroscopy and arthroscopy.The surgeon should be careful not to "push up" in 1 small area; rather, a "joker" elevator or bone tamp should be utilized, moving anterior to posterior, which can be frequently assessed with arthroscopy.The intra-articular pressure of the arthroscopy irrigation fluid should be low (≤45 mm Hg or gravity flow), and the operative extremity should be monitored for compartment syndrome throughout the procedure.
ACL = anterior cruciate ligamentK-wires = Kirschner wiresORIF = open reduction and internal fixationAP = anteroposteriorCR = computed radiography.
胫骨平台骨折约占成人骨折的1%至2%。这些骨折呈现双峰分布,在年轻患者中为高能骨折,在老年患者中为低能脆性骨折。手术治疗的目标是恢复关节稳定性、肢体对线和关节面的一致性,同时将诸如僵硬、感染和创伤后骨关节炎等并发症降至最低。传统上,切开复位内固定,通过直接观察关节复位情况或通过透视间接评估,一直是移位胫骨平台骨折的标准治疗方法。然而,人们担心切开固定胫骨平台骨折时关节面的可视化不充分,这导致全膝关节置换术的转换率增加了五倍。此外,据报道伤口并发症和感染的风险高达12%。膝关节镜检查结合经皮空心螺钉固定提供了一种侵入性较小的手术方法,对关节面有极佳的可视化效果,与传统的切开复位内固定技术相比,能够实现准确的复位和骨折固定。最近关于关节镜辅助经皮螺钉固定胫骨平台骨折的研究报告了优异的早期临床和影像学结果以及低并发症发生率。
该技术涉及使用关节镜检查和透视来促进胫骨平台骨折的复位和固定。通过微创技术,利用术前计算机断层扫描(CT)和术中双平面透视来确定凹陷的关节面。然后通过关节镜检查直接观察复位情况,并利用透视进行固定。最后,在确定固定后通过关节镜检查确认关节面的恢复情况。可根据需要进行调整。
移位胫骨平台骨折的传统固定方法是切开复位内固定。关节复位可通过切开半月板下关节切开术和同侧股骨牵开器直接观察,或通过透视间接观察。
关节面的可视化对于实现关节线的解剖复位至关重要。采用开放手术方法很难检查后平台。关节镜辅助经皮螺钉固定胫骨平台骨折可通过增强可视化来改善关节面的恢复。较少的软组织剥离与较低的发病率相关,可能导致对血供的损伤较小、感染和伤口并发症发生率较低、愈合更快以及患者的活动能力更好。根据我们的经验,该技术在患有严重骨质疏松和凹陷骨折块粉碎的患者中取得了成功。如果需要进行全膝关节置换术,我们还观察到使用这种手术技术对血供的损伤较小且手术疤痕较少。
关节镜辅助经皮螺钉固定胫骨平台骨折通过侵入性较小的方法促进解剖复位。接受这种胫骨平台骨折固定方法的患者能够更早地进行康复。研究表明术后早期活动范围良好、患者报告的结果优异且并发症极少。
关节镜辅助固定可应用于各种胫骨平台骨折;然而,微创方法最适合孤立的外侧胫骨平台骨折(Schatzker I至III型)且皮质骨壳易于恢复的患者。皮质骨壳是指胫骨平台的外缘。骨折类型和韧带整复决定皮质骨壳,可在术前CT扫描上进行评估。根据我们的经验,即使是粉碎程度很高的凹陷骨折块也可采用该技术治疗并取得满意结果。应利用术前CT扫描、术中透视和关节镜检查来确定关节凹陷。外科医生应小心不要在一个小区域内“向上推”;相反,应使用“小丑”式骨膜剥离器或骨锤,从前向后移动,可通过关节镜检查频繁评估。关节镜冲洗液的关节内压力应较低(≤45毫米汞柱或重力流),并且在整个手术过程中应对手术肢体进行骨筋膜室综合征监测。
ACL = 前交叉韧带;K-wires = 克氏针;ORIF = 切开复位内固定;AP = 前后位;CR = 计算机X线摄影。