Department for Orthopaedics, Hannover Medical School, Anna-Von-Borries-Str. 1-7, 30625, Hannover, Germany.
Laboratory for Biomechanics and Biomaterials, Hannover Medical School, Anna-Von-Borries-Str. 1-7, 30625, Hannover, Germany.
Sci Rep. 2023 Feb 10;13(1):2387. doi: 10.1038/s41598-023-29513-z.
In cases where mobility and joint function are impaired after implantation of a THA, weakening of hip movement in both extension/flexion and adduction/abduction may play a role due to shortening of the physiological lever arm of the hip muscles. Mechanical factors of influence include the lateral femoral offset, which affects the lever arm, and the antetorsion angle of the hip prosthesis, which affects the anterior femoral offset. This study aimed to investigate the effect of an altered antetorsion angle of the implant on the hip moments and gait patterns of the patient. For this study, 13 patients with a conventional stem on one side and a calcar-guided short stem implanted on the contralateral side were included. To determine the maximum hip moment, tests were performed on a dynamometer in extension/flexion and adduction/abduction in addition to gait analysis. As a control, a comparison was made with data from a reference group of 30 healthy subjects. Both implants showed similar symmetry indices. There was a significant difference between the implants for adduction moments (p < 0.001). The ratios between the directions of moments showed no significant differences. The joint function measured by isokinetic measurements and gait analysis remains comparable to the healthy control group after short stem arthroplasty, but shows slight changes after conventional stem arthroplasty.
在全髋关节置换术后出现活动度和关节功能障碍的情况下,由于髋关节肌肉的生理力臂缩短,可能会导致髋关节在伸展/屈曲和内收/外展两个方向的活动减弱。影响的力学因素包括影响力臂的股骨外侧偏移,以及影响前股骨偏移的髋关节假体前扭转角。本研究旨在探讨植入物扭转角度的改变对患者髋关节力矩和步态模式的影响。为此,本研究纳入了 13 名患者,其中一侧为常规柄,另一侧为骺板导向短柄。为了确定最大髋关节力矩,除了步态分析外,还在测力计上进行了伸展/屈曲和内收/外展测试。作为对照,将其与 30 名健康受试者的参考组数据进行了比较。两种植入物的对称指数相似。内收力矩的植入物之间存在显著差异(p < 0.001)。力矩方向之间的比值没有显著差异。等速测量和步态分析测量的关节功能在短柄关节成形术后与健康对照组保持可比,但在常规柄关节成形术后显示出轻微变化。