Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei, 10607, Taiwan, ROC.
Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei, 10607, Taiwan, ROC.
Chemosphere. 2023 May;323:138108. doi: 10.1016/j.chemosphere.2023.138108. Epub 2023 Feb 15.
Heterojunction engineering in catalyst structures is a promising approach for solving the main restriction of the narrow photoabsorption range and quick recombination of photogenerated charge carriers in the photocatalysts. Herein, a simple, eco-friendly, non-toxic, and novel Z-scheme heterojunction of nanoflower-like NiS/BiOI was systematically designed using the low-temperature solvothermal and precipitation methods. The physicochemical and photo-electrochemical properties of the as-synthesized nanomaterials were characterized using XRD, FESEM, FT-IR, XPS, BET, UV-vis, PL, and EIS. NiS/BiOI nanomaterials exhibited a wide photoabsorption range (200-1000 nm), a narrow bandgap energy (1.76 eV), a large surface area (35.82 m g), and a low charge carrier recombination rate because of the synergistic effects of the NiS and BiOI photocatalysts, which could be the basis for superior photocatalytic efficiency. Particularly, the optimal 40% NiS/BiOI nanocomposite exhibited better stability and efficiency than the pure NiS and BiOI. The maximum degradation efficiency of rhodamine B (RhB) was 99.8% after 200 min, tetracycline (TC) was 96.3% after 140 min, and the photoreduction of Cr(VI) was 92.8% after 180 min rather than the pure NiS and BiOI under visible light irradiation. The constant rate (k) of RhB was approximately 10 and 4, TC was 12 and 4, and Cr(VI) was 10 and 8 times that of pristine NiS and BiOI, respectively. Radical trapping experiments and Tauc plot analysis proposed the design of the plausible Z-scheme reaction mechanism between NiS and BiOI, which has a crucial role in the rate of transportation and separation of electron/hole pairs. This investigation provides a venue for the design of a photoactive NiS-based nanocomposite for environmental remediation.
在催化剂结构中进行异质结工程是解决光催化剂中光吸收范围窄和光生载流子快速复合这一主要限制的有前景的方法。在此,通过低温溶剂热和沉淀法系统地设计了一种简单、环保、无毒且新颖的纳米花状 NiS/BiOI Z 型异质结。使用 XRD、FESEM、FT-IR、XPS、BET、UV-vis、PL 和 EIS 对合成的纳米材料的物理化学和光电化学性质进行了表征。NiS/BiOI 纳米材料表现出宽的光吸收范围(200-1000nm)、窄的能带隙能量(1.76eV)、大的比表面积(35.82m²/g)和低的载流子复合率,这是由于 NiS 和 BiOI 光催化剂的协同作用,这可能是优异的光催化效率的基础。特别是,最佳的 40% NiS/BiOI 纳米复合材料比纯 NiS 和 BiOI 具有更好的稳定性和效率。在可见光照射下,罗丹明 B(RhB)的最大降解效率为 200min 时为 99.8%,四环素(TC)为 140min 时为 96.3%,Cr(VI)的光还原为 180min 时为 92.8%,而不是纯 NiS 和 BiOI。RhB 的恒速(k)约为 10 和 4,TC 为 12 和 4,Cr(VI)分别为 10 和 8 倍,分别是原始 NiS 和 BiOI 的。自由基捕获实验和 Tauc 图分析提出了 NiS 和 BiOI 之间可能的 Z 型反应机制的设计,这对于电子/空穴对的传输和分离速率起着关键作用。这项研究为设计用于环境修复的基于 NiS 的光活性纳米复合材料提供了一个途径。