Elmaghraoui Donia, Ben Amara Imen, Jaziri Sihem
Laboratoire de Physique de la Matiére Condensée, Faculté des Sciences de Tunis, Campus Universitaire, El Manar 2092, Tunisia.
Laboratoire de Physique des Matériaux, Structures et Propriétés, Faculté des Sciences de Bizerte, Jarzouna 7021, Tunisia.
Membranes (Basel). 2023 Feb 4;13(2):195. doi: 10.3390/membranes13020195.
Developing photothermal solar driven membrane distillation (PSDMD) is of great importance in providing fresh water for remote off-grid regions. The production of freshwater through the PSDMD is driven by the temperature difference between feed and distillate sides created via the addition of efficient photothermal nanostructures. Here we proposed nickel sulfides and nickel tellurium nanoparticles (NPs) to be loaded into the polymeric membrane to enhance its performance. Ag and CuSe NPs are also considered for comparison as they are previously used for membrane distillation (MD). Our theoretical approach showed that all of the considered NPs increased the temperature of the PVDF membrane by around a few degrees. NiS and NiTe2 NPs are the most efficient solar light-to-heat converters compared to NiTe and NiS2 NPs due to their efficient absorption over the visible range. PVDF membrane loaded with 25% of NiCs NPs and a porosity of 32% produced a transmembrane vapor flux between 22 and 27 L/mh under a 10-times-amplified sun intensity. Under the same conditions, the PVDF membrane loaded with CuSe and Ag NPs produced 15 and 18 L/mh of vapor flux, respectively. The implantation of NPs through the membrane not only increased its surface temperature but also possessed a high porosity which provided a higher distillation and energy efficiency that reached 58% with NiS NPs. Finally, great agreement between our theoretical model and experimental measurement is obtained.
开发光热太阳能驱动膜蒸馏(PSDMD)对于为偏远离网地区提供淡水至关重要。通过PSDMD生产淡水是由通过添加高效光热纳米结构在进料侧和馏出物侧之间产生的温差驱动的。在这里,我们提出将硫化镍和碲化镍纳米颗粒(NPs)负载到聚合物膜中以提高其性能。还考虑了Ag和CuSe NPs进行比较,因为它们以前用于膜蒸馏(MD)。我们的理论方法表明,所有考虑的NPs都使聚偏氟乙烯(PVDF)膜的温度升高了大约几度。与NiTe和NiS2 NPs相比,NiS和NiTe2 NPs是最有效的太阳能光热转换器,因为它们在可见光范围内具有高效吸收。负载25% NiCs NPs且孔隙率为32%的PVDF膜在太阳强度放大10倍的情况下产生的跨膜蒸汽通量在22至27 L/mh之间。在相同条件下,负载CuSe和Ag NPs的PVDF膜分别产生15和18 L/mh的蒸汽通量。通过膜植入NPs不仅提高了其表面温度,而且具有高孔隙率,这提供了更高的蒸馏效率和能量效率,使用NiS NPs时达到58%。最后,我们的理论模型与实验测量结果取得了很好的一致性。