Förch Stefan, Sandriesser Sabrina, von Rüden Christian, Mayr Edgar, Augat Peter
Department of Trauma, Orthopaedic, Plastic and Hand Surgery, University Hospital of Augsburg, Stenglinstrasse 2, 86156 Augsburg, Germany.
Institute for Biomechanics, BG Unfallklinik Murnau, Prof. Küntscher Str. 8, 82418 Murnau, Germany.
J Clin Med. 2023 Feb 22;12(5):1770. doi: 10.3390/jcm12051770.
Partial weight-bearing after operatively treated fractures has been the standard of care over the past decades. Recent studies report on better rehabilitation and faster return to daily life in case of immediate weight-bearing as tolerated. To allow early weight-bearing, osteosynthesis needs to provide sufficient mechanical stability. The purpose of this study was to investigate the stabilizing benefits of additive cerclage wiring in combination with intramedullary nailing of distal tibia fractures.
In 14 synthetic tibiae, a reproducible distal spiral fracture was treated by intramedullary nailing. In half of the samples, the fracture was further stabilized by additional cerclage wiring. Under clinically relevant partial and full weight-bearing loads the samples were biomechanically tested and axial construct stiffness as well as interfragmentary movements were assessed. Subsequently, a 5 mm fracture gap was created to simulate insufficient reduction, and tests were repeated.
Intramedullary nails offer already high axial stability. Thus, axial construct stiffness cannot be significantly enhanced by an additive cerclage (2858 ± 958 N/mm NailOnly vs. 3727 ± 793 N/mm Nail + Cable; = 0.089). Under full weight-bearing loads, additive cerclage wiring in well-reduced fractures significantly reduced shear ( = 0.002) and torsional movements ( = 0.013) and showed similar low movements as under partial weight-bearing (shear 0.3 mm, = 0.073; torsion 1.1°, = 0.085). In contrast, additional cerclage had no stabilizing effect in large fracture gaps.
In well-reduced spiral fractures of the distal tibia, the construct stability of intramedullary nailing can be further increased by additional cerclage wiring. From a biomechanical point of view, augmentation of the primary implant reduced shear movement sufficiently to allow immediate weight-bearing as tolerated. Especially, elderly patients would benefit from early post-operative mobilization, which allows for accelerated rehabilitation and a faster return to daily activities.
在过去几十年中,手术治疗骨折后部分负重一直是标准的治疗方法。最近的研究报告称,在可耐受的情况下立即负重,康复效果更好,能更快恢复日常生活。为了实现早期负重,骨固定需要提供足够的机械稳定性。本研究的目的是探讨附加环扎钢丝结合胫骨干骺端骨折髓内钉固定的稳定效果。
在14根合成胫骨上,通过髓内钉治疗可重复的远端螺旋骨折。在一半的样本中,通过附加环扎钢丝进一步稳定骨折。在临床相关的部分和完全负重负荷下,对样本进行生物力学测试,并评估轴向结构刚度以及骨折块间的运动。随后,制造5毫米的骨折间隙以模拟复位不足,并重复测试。
髓内钉已经提供了较高的轴向稳定性。因此,附加环扎钢丝不能显著提高轴向结构刚度(仅髓内钉组为2858±958N/mm,髓内钉+钢丝组为3727±793N/mm;P=0.089)。在完全负重负荷下,复位良好的骨折附加环扎钢丝可显著减少剪切运动(P=0.002)和扭转运动(P=0.013),并且与部分负重时的运动相似(剪切0.3毫米,P=0.073;扭转1.1°,P=0.085)。相比之下,在大骨折间隙中,附加环扎钢丝没有稳定作用。
在复位良好的胫骨干骺端螺旋骨折中,附加环扎钢丝可进一步提高髓内钉固定的结构稳定性。从生物力学角度来看,增强初次植入物可充分减少剪切运动,从而允许在可耐受的情况下立即负重。特别是老年患者将从术后早期活动中受益,这有助于加速康复并更快恢复日常活动。