Northwestern University, United States; Shirley Ryan AbilityLab, United States; Edward Hines, Jr. Veterans Affairs Hospital, United States.
Northwestern University, United States; Shirley Ryan AbilityLab, United States; Edward Hines, Jr. Veterans Affairs Hospital, United States.
J Biomech. 2023 Apr;151:111501. doi: 10.1016/j.jbiomech.2023.111501. Epub 2023 Feb 23.
Muscle volume is an important parameter in analyzing three-dimensional structure of muscle-tendon units. Three-dimensional ultrasound (3DUS) enables excellent quantification of muscle volume in small muscles; however, when a muscle's cross sectional area is larger than the field of view of the ultrasound transducer at any point along its length, more than one sweep is necessary to reconstruct muscle anatomy. Confounding image registration errors have been reported between multiple sweeps. Here, we detail imaging phantom studies used to (1) define an acquisition protocol that reduces misalignment in 3D reconstruction caused by muscle deformation, and (2) quantify accuracy of 3DUS for measures of volume when phantoms are too large to be fully imaged via a single transducer sweep. Finally, we (3) establish the feasibility of our protocol for in vivo measures by comparing biceps brachii muscle volumes using 3DUS and magnetic resonance imaging (MRI). Phantom studies indicate operator intent to use constant pressure across multiple sweeps effectively mitigates image misalignment, yielding minimal volume error (1.70 ± 1.30%). Intentional application of different pressure between sweeps replicated discontinuity observed previously, leading to larger errors (5.30 ± 0.94%). Based on these findings, we adopted a gel bag standoff and acquired in vivo images of biceps brachii muscles using 3DUS and compared this volume to MRI. We did not observe misalignment errors and there were no significant differences between imaging modalities (-0.71 ± 5.03 %), indicating 3DUS can reliably be used to quantify muscle volume in larger muscles requiring multiple transducer sweeps.
肌肉体积是分析肌肉-肌腱单位三维结构的一个重要参数。三维超声(3DUS)能够很好地定量小肌肉的肌肉体积;然而,当肌肉的横截面积在其长度的任何一点上都大于超声换能器的视野时,就需要不止一次的扫描来重建肌肉解剖结构。已经报道了在多次扫描之间存在混淆的图像配准误差。在这里,我们详细介绍了成像体模研究,用于:(1) 定义一种采集协议,减少由于肌肉变形引起的 3D 重建中的错位;(2) 量化当体模太大而无法通过单个换能器扫描完全成像时,3DUS 用于体积测量的准确性;最后,我们 (3) 通过比较使用 3DUS 和磁共振成像 (MRI) 测量的肱二头肌体积,来确定我们的方案用于活体测量的可行性。体模研究表明,操作人员有意在多次扫描中使用恒定压力,有效地减轻了图像错位,从而产生最小的体积误差(1.70 ± 1.30%)。有意在扫描之间施加不同的压力复制了以前观察到的不连续性,导致更大的误差(5.30 ± 0.94%)。基于这些发现,我们采用了凝胶袋隔垫,并使用 3DUS 对肱二头肌进行了活体图像采集,并将该体积与 MRI 进行了比较。我们没有观察到错位误差,并且两种成像方式之间没有显著差异(-0.71 ± 5.03%),这表明 3DUS 可以可靠地用于量化需要多次换能器扫描的较大肌肉的肌肉体积。