Institute of Food Science and Technology, Chinese Academy of Agricultural Sciences/Key Laboratory of Agro-Products Processing, Ministry of Agriculture and Rural Affairs, Beijing 100193, China.
Department of Biomedical Engineering, Tufts University, 4 Colby St., Medford 02155 Massachusetts, USA.
Food Res Int. 2023 Apr;166:112623. doi: 10.1016/j.foodres.2023.112623. Epub 2023 Feb 22.
Plant proteins can be extruded under high moisture content (above 40 %) to form meat-like fibrous structures, which is the basis for meat-like substitute products. However, the proteins' extrudability from various sources remain challenging in terms of generating fibrous structures under combinations of high-moisture extrusion with transglutaminase (TGase) modifications. In this study, proteins from soy (soy protein isolate, SPI, and soy protein concentrate, SPC), pea (pea protein isolate, PPI), peanut (peanut protein powder, PPP), wheat (wheat gluten, WG), and rice (rice protein isolate, RPI) were texturized using high-moisture extrusion combined with transglutaminase (TGase) modifications to enact changes in protein structure and extrusion capabilities. The results showed that soy proteins (SPI or SPC) responsed to torque, die pressure and temperature during extrusion, and this phenomenon was more pronounced at a higher protein content (SPI). In contrast, rice protein exhibited poor extrudability, leading to large losses of thermomechanical energy. TGase significantly affects the orientation of protein fibrous structures along the extrusion direction by impacting the rate of protein gelation during the high-moisture extrusion process, with the impact mainly occurring in the cooling die. Globulins (mainly 11S) played a major role in forming fibrous structures and the aggregation of globulins or reduction of gliadins under TGase modification impacted the orientation of the fibrous structure along the extrusion direction. Some thermomechanical treatment during high-moisture extrusion results in protein conversion from compact structure into more extended or stretched state, and the increase of random coil structures for proteins derived from wheat and rice would lead to these looser structures in the extrudates. Thus, TGase can be combined with high-moisture extrusion to regulate the formation of plant protein fibrous structures, dependent on the specific protein source and content.
植物蛋白在高水分含量(高于 40%)下可以被挤压成类似肉的纤维结构,这是肉类替代品的基础。然而,从各种来源获得的蛋白质在高水分挤压与转谷氨酰胺酶(TGase)修饰相结合的情况下生成纤维结构仍然具有挑战性。在这项研究中,使用高水分挤压结合转谷氨酰胺酶(TGase)修饰来对大豆(大豆分离蛋白,SPI 和大豆浓缩蛋白,SPC)、豌豆(豌豆分离蛋白,PPI)、花生(花生蛋白粉,PPP)、小麦(小麦面筋,WG)和大米(大米分离蛋白,RPI)的蛋白质进行组织化处理,以改变蛋白质结构和挤压性能。结果表明,大豆蛋白(SPI 或 SPC)在挤压过程中对扭矩、模具压力和温度有反应,这种现象在较高的蛋白质含量(SPI)下更为明显。相比之下,大米蛋白的可挤压性较差,导致热机械能量损失较大。TGase 通过影响高水分挤压过程中蛋白质凝胶化的速度,显著影响蛋白质纤维结构沿挤压方向的取向,这种影响主要发生在冷却模具中。球蛋白(主要是 11S)在形成纤维结构和球蛋白的聚集或谷蛋白的减少中起着主要作用,在 TGase 修饰下,球蛋白或谷蛋白的聚集或减少会影响纤维结构沿挤压方向的取向。高水分挤压过程中的一些热机械处理导致蛋白质从紧密结构转化为更伸展或拉伸的状态,并且来自小麦和大米的蛋白质的无规卷曲结构的增加会导致挤出物中的这些较宽松结构。因此,TGase 可以与高水分挤压相结合,调节植物蛋白纤维结构的形成,这取决于特定的蛋白质来源和含量。