Thin Film Materials Research Center, Korea Research Institute of Chemical Technology, 141 Gajeong-ro, Yuseong-gu, Daejeon 34114, Republic of Korea.
Department of Chemistry, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon-si, Gyeonggi-do 16419, Republic of Korea.
Inorg Chem. 2023 Mar 20;62(11):4680-4687. doi: 10.1021/acs.inorgchem.3c00141. Epub 2023 Mar 8.
This paper reports the synthesis of three novel titanium complexes containing amidoxime ligands as potential precursors for titanium nitride (TiN) thin films fabricated using atomic layer deposition (ALD). A series of ligands, ., '-methoxy--methylacetimidamide (mnnoH), '-ethoxy--methylacetimidamide (ennoH), and '-methoxy--methylbenzimidamide (pnnoH), were successfully synthesized and used to produce Ti(mnno)(NMe) (), Ti(enno)(NMe) (), and Ti(pnno)(NMe) (). Thermogravimetric analysis curves of complexes - revealed a single-step weight loss up to 200 °C. Pyrolysis occurred beyond 200 °C. Among the three new complexes, was liquid at room temperature. Therefore, TiN was synthesized by ALD using Ti(enno)(NMe) () as a novel precursor. A TiN thin film was deposited from the Ti(enno)(NMe) ( precursor and NH plasma, and self-limiting growth was achieved by varying the injection/purge duration. TiN thin film growths were observed with a growth per cycle (GPC) of 0.05-0.13 nm·cy at deposition temperatures between 150 and 300 °C, while the measured resistivity was as low as 420 μΩ·cm. The high reactivity of the precursor promotes nucleation, resulting in TiN thin films with smooth, good step coverage and preferentially orientated microstructure.
本文报道了三种新型钛配合物的合成,这些配合物含有氨肟基配体,可用作原子层沉积 (ALD) 法制备氮化钛 (TiN) 薄膜的潜在前体。成功合成了一系列配体,即 2-甲氧基-N-甲基乙酰胺肟 (mnnoH)、2-乙氧基-N-甲基乙酰胺肟 (ennoH) 和 2-甲氧基-N-甲基苯甲酰胺肟 (pnnoH),并用于制备 Ti(mnno)(NMe) ()、Ti(enno)(NMe) () 和 Ti(pnno)(NMe) ()。配合物 - 的热重分析曲线显示,在 200°C 之前发生了单一的重量损失。超过 200°C 时会发生热解。在这三种新的配合物中,只有 是室温下的液体。因此,通过使用 Ti(enno)(NMe) () 作为新型前体,通过原子层沉积法合成了 TiN。通过 Ti(enno)(NMe) () 前体和 NH 等离子体沉积 TiN 薄膜,并通过改变注入/吹扫时间来实现自限制生长。在沉积温度为 150-300°C 时,观察到 TiN 薄膜的生长速率为 0.05-0.13nm·cy,而测量的电阻率低至 420μΩ·cm。前体的高反应性促进了成核,从而得到了具有光滑、良好台阶覆盖和优先取向结构的 TiN 薄膜。