Suppr超能文献

比较行白内障手术的圆锥角膜患者使用标准人工晶状体公式与专用人工晶状体公式的效果。

Comparison of Keratoconus Specific to Standard IOL Formulas in Patients With Keratoconus Undergoing Cataract Surgery.

出版信息

J Refract Surg. 2023 Apr;39(4):242-248. doi: 10.3928/1081597X-20230124-01. Epub 2023 Apr 1.

Abstract

PURPOSE

To assess the performance of multiple intraocular lens (IOL) formulas in eyes with keratoconus.

METHODS

Eyes with stable keratoconus scheduled for cataract surgery with biometry measurements on the Lenstar LS900 (Haag-Streit) were included. Prediction errors were calculated using 11 different formulas, including two with keratoconus modifiers. Primary outcomes compared standard deviations, mean and median numerical errors, and percentage of eyes within diopter (D) ranges across all eyes with subgroup analysis according to anterior keratometric values.

RESULTS

Sixty-eight eyes from 44 patients were identified. In eyes with keratometric values less than 50.00 D, prediction error standard deviations ranged from 0.680 to 0.857 D. Percentages of eyes within ±0.50 D of target ranged from 57.89% to 73.68% with no statistical differences among formulas. In eyes with a keratometric value of more than 50.00 D, prediction error standard deviations ranged from 1.849 to 2.349 D and were not statistically different with heteroscedastic analysis; percentages of eyes within ±0.50 D of target ranged from 0% to 18.18% with no statistical differences among formulas. Only keratoconus-specific formulas (Barrett-KC and Kane-KC) and the Wang-Koch axial length adjustment version of SRK/T resulted in median numerical errors not significantly different than 0, regardless of keratometric values.

CONCLUSIONS

In keratoconic eyes, IOL formulas are less accurate than in normal eyes and result in hyperopic refractive outcomes that increase with steeper keratometric values. Using keratoconus-specific formulas and the Wang-Koch axial length adjustment version of SRK/T for axial lengths of 25.2 mm or greater improved IOL power prediction accuracy compared to other formulas. .

摘要

目的

评估多种人工晶状体(IOL)公式在圆锥角膜眼中的性能。

方法

纳入计划行白内障手术且生物测量值可在 Lenstar LS900(Haag-Streit)上获取的稳定圆锥角膜眼。使用 11 种不同公式计算预测误差,其中包括两种具有圆锥角膜修正功能的公式。主要结果比较了所有眼的标准偏差、平均和中位数数值误差以及屈光度(D)范围内的眼数,根据前角膜曲率值进行亚组分析。

结果

共纳入 44 例患者的 68 只眼。在角膜曲率值小于 50.00 D 的眼中,预测误差标准偏差范围为 0.680 至 0.857 D。目标值 ±0.50 D 范围内的眼百分比范围为 57.89%至 73.68%,各公式之间无统计学差异。在角膜曲率值大于 50.00 D 的眼中,预测误差标准偏差范围为 1.849 至 2.349 D,异方差分析无统计学差异;目标值 ±0.50 D 范围内的眼百分比范围为 0%至 18.18%,各公式之间无统计学差异。仅具有圆锥角膜特异性的公式(Barrett-KC 和 Kane-KC)和 SRK/T 的 Wang-Koch 眼轴调整版本导致中位数数值误差与 0 无显著差异,无论角膜曲率值如何。

结论

在圆锥角膜眼中,IOL 公式的准确性低于正常眼,导致远视屈光结果,随着角膜曲率值的增加而增加。与其他公式相比,对于 25.2 mm 或更大的眼轴长度,使用具有圆锥角膜特异性的公式和 SRK/T 的 Wang-Koch 眼轴调整版本可提高 IOL 功率预测准确性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验