Insight into the marine microplastic abundance and distribution in ship cooling systems.

Microplastics (MPs) are becoming widely recognized as one of many global environmental issues. Although recently, it has been suggested that marine plastics may affect a ship's operation, the presence of MPs in a ship's cooling system has not received significant attention. In this study, samples of 40 L each were taken from each of the five main pipes (sea chest (SC), ejector pump (EP), main engine jacket freshwater pump (MJFP), main engine jacket freshwater cooler (MJFC), and expansion tank (ET)) in each season (February, May, July, October 2021) to identify and characterize MPs in the five main pipes of the ship cooling system from the training ship Hanbada, Korea Maritime and Ocean University. As a result of FTIR analysis, the total MP abundance was 24,100 particles/m in the cooling system of the ship. MP concentrations were observed to be higher (p < 0.05) in winter and spring (dry season: 1578 ± 604 particles/m) than in summer and autumn (wet season: 990 ± 390 particles/m). In addition, the MP concentration in the seawater cooling system (SCS) (1509 ± 553 particle/m) was slightly higher (p > 0.05) than that in the freshwater cooling system (FCS) (1093 ± 546 particles/m). Compared to previous studies, it was confirmed that the quantitative amount of MPs on board was similar to or slightly less than the concentration of MPs investigated along the coast of Korea (1736 particles/m). To identify the chemical composition of MPs, an optical microscope and FTIR analysis was carried out, and PE (polyethylene), PP (polypropylene), and PET (polyethylene terephthalate) were identified as major chemicals in all samples. MPs in the form of fibers and fragments accounted for approximately 95% of the total. This study provided evidence of MP contamination in the main pipe in the cooling system of the ship. These findings confirm that marine MPs existing in seawater may have flowed into the ship's cooling system, and it is necessary to understand the effect of marine MPs on the ship's engine and cooling system through continuous monitoring.