Numin Mohd Sofi, Jumbri Khairulazhar, Kee Kok Eng, Hassan Almila, Borhan Noorazlenawati, Matmin Juan
Department of Fundamental and Applied Sciences, Universiti Teknologi Petronas, Seri Iskandar 32610, Malaysia.
Department of Mechanical Engineering, Universiti Teknologi Petronas, Seri Iskandar 32610, Malaysia.
Polymers (Basel). 2023 Apr 30;15(9):2155. doi: 10.3390/polym15092155.
Gemini surfactant corrosion inhibitor (CI) is one type of CI mainly used in mitigating corrosion in the complex system of oil/gas production industries. Computer modeling methods such as density functional theory (DFT) calculation and molecular dynamic (MD) simulation are required to develop new CI molecules focusing on their application condition as a prediction or screening process before the physical empirical assessment. In this work, the adsorption inhibition efficiencies of two monomer surfactants (2B and H) and their respective Gemini structures with the addition of different spacers (alkyl, benzene, ester, ether, and ketone) are investigated using DFT calculation and MD simulation method in 3% sodium chloride (NaCl), and 1500 ppm acetic acid solutions. In DFT calculation, 2B-benzene molecules are assumed to have the most promising inhibition efficiency based on their high reactivity and electron-donating ability at their electron-rich benzene ring region based on the lowest bandgap energy (0.765 eV) and highest HOMO energy value (-2.879 eV), respectively. DFT calculation results correlate with the adsorption energy calculated from MD simulation, where 2B-benzene is also assumed to work better as a CI molecule with the most adsorption strength towards Fe (110) metal with the highest negative adsorption energy value (-1837.33 kJ/mol at temperature 323 K). Further, diffusion coefficient and molecular aggregation analysis in different CI concentrations through MD simulation reveals that only a small amount of Gemini surfactant CI is needed in the inhibition application compared to its respective monomer. Computer simulation methods successfully predict and screen the Gemini surfactant CI molecules that can work better as a corrosion inhibitor in acetic acid media. The amount of Gemini surfactant CI that needs to be used is also predicted. The future planning or way forward from this study will be the development of the most promising Gemini surfactant CI based on the results from DFT calculation and MD simulations.
双子表面活性剂缓蚀剂(CI)是主要用于减轻石油/天然气生产行业复杂系统中腐蚀的一类缓蚀剂。在进行物理经验评估之前,需要采用密度泛函理论(DFT)计算和分子动力学(MD)模拟等计算机建模方法,根据其应用条件来开发新的CI分子,作为预测或筛选过程。在这项工作中,使用DFT计算和MD模拟方法,研究了两种单体表面活性剂(2B和H)及其添加不同间隔基(烷基、苯、酯、醚和酮)的各自双子结构在3%氯化钠(NaCl)和1500 ppm乙酸溶液中的吸附抑制效率。在DFT计算中,基于2B-苯分子在其富电子苯环区域具有高反应性和给电子能力,分别根据最低带隙能量(0.765 eV)和最高HOMO能量值(-2.879 eV),假定其具有最有前景的抑制效率。DFT计算结果与MD模拟计算的吸附能相关,其中2B-苯也被假定作为CI分子效果更好,对Fe(110)金属具有最强的吸附强度,在温度323 K时具有最高的负吸附能值(-1837.33 kJ/mol)。此外,通过MD模拟对不同CI浓度下的扩散系数和分子聚集分析表明,与各自的单体相比,在抑制应用中只需要少量的双子表面活性剂CI。计算机模拟方法成功地预测和筛选了在乙酸介质中作为缓蚀剂效果更好的双子表面活性剂CI分子。还预测了需要使用的双子表面活性剂CI的量。基于DFT计算和MD模拟的结果,本研究未来的规划或前进方向将是开发最有前景的双子表面活性剂CI。