Fernández-Montoro Andrea, Angel-Velez Daniel, Benedetti Camilla, Azari-Dolatabad Nima, Pascottini Osvaldo Bogado, Van Soom Ann, Pavani Krishna Chaitanya
Department of Internal Medicine, Reproduction and Population Medicine, Ghent University, 9820 Merelbeke, Belgium.
Research Group in Animal Sciences-INCA-CES, Universidad CES, Medellin 050021, Colombia.
Animals (Basel). 2023 May 14;13(10):1635. doi: 10.3390/ani13101635.
In vivo-matured oocytes exhibit higher developmental competence than those matured in vitro but mimicking the in vivo environment by in vitro conditions has been challenging. Until now, conventional two-dimensional (2D) systems have been used for in vitro maturation of bovine cumulus-oocytes-complexes (COCs). However, using such systems present certain limitations. Therefore, alternative low-cost methodologies may help to optimize oocyte in vitro maturation. Here, we used two different systems to culture COCs and evaluate their potential influence on embryo development and quality. In the first system, we used treated fumed silica particles to create a 3D microenvironment (liquid marbles; LM) to mature COCs. In the second system, we cultured COCs in 96-well plates with different dimensions (flat, ultra-low attachment round-bottom, and v-shaped 96-well plates). In both systems, the nuclear maturation rate remained similar to the control in 2D, showing that most oocytes reached metaphase II. However, the subsequent blastocyst rate remained lower in the liquid marble system compared with the 96-well plates and control 2D systems. Interestingly, a lower total cell number was found in the resulting embryos from both systems (LM and 96-well plates) compared with the control. In conclusion, oocytes matured in liquid marbles or 96-well plates showed no remarkable change in terms of meiotic resumption. None of the surface geometries influenced embryo development while oocyte maturation in liquid marbles led to reduced embryo development. These findings show that different geometry during maturation did not have a large impact on oocyte and embryo development. Lower embryo production after in vitro maturation in liquid marbles was probably detected because in vitro maturation was performed in serum-free medium, which makes oocytes more sensitive to possible toxic effects from the environment.
体内成熟的卵母细胞比体外成熟的卵母细胞具有更高的发育能力,但通过体外条件模拟体内环境一直具有挑战性。到目前为止,传统的二维(2D)系统已用于牛卵丘-卵母细胞复合体(COC)的体外成熟。然而,使用这种系统存在一定的局限性。因此,替代性的低成本方法可能有助于优化卵母细胞的体外成熟。在这里,我们使用两种不同的系统培养COC,并评估它们对胚胎发育和质量的潜在影响。在第一个系统中,我们使用处理过的气相二氧化硅颗粒创建三维微环境(液体弹珠;LM)来使COC成熟。在第二个系统中,我们在具有不同尺寸的96孔板(平底、超低附着圆底和V形96孔板)中培养COC。在这两个系统中,核成熟率与二维对照组相似,表明大多数卵母细胞达到了中期II。然而,与96孔板和二维对照组相比,液体弹珠系统中的后续囊胚率仍然较低。有趣的是,与对照组相比,来自这两个系统(液体弹珠和96孔板)的所得胚胎中的总细胞数较低。总之,在液体弹珠或96孔板中成熟的卵母细胞在减数分裂恢复方面没有显著变化。没有一种表面几何形状影响胚胎发育,而在液体弹珠中进行卵母细胞成熟会导致胚胎发育减少。这些发现表明,成熟过程中不同的几何形状对卵母细胞和胚胎发育没有很大影响。在液体弹珠中进行体外成熟后胚胎产量较低,可能是因为体外成熟是在无血清培养基中进行的,这使得卵母细胞对环境中可能的毒性作用更加敏感。