Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Bandung, Jalan Ganesha No. 10, Bandung, West Java, 40132, Indonesia.
Indonesian Center for Agricultural Postharvest Research and Development, Indonesian Agency for Agricultural Research and Development, Bogor, 16124, Indonesia.
Curr Microbiol. 2023 Jun 22;80(8):250. doi: 10.1007/s00284-023-03345-6.
Lignocellulosic material is one of the raw materials that can be used to reduce the cost of biosurfactant production because it is cheap, abundantly available, and contains cellulose and hemicellulose which can be hydrolyzed to glucose and xylose as carbon sources. This study aimed to evaluate biosurfactant production by Bacillus species using glucose and xylose as carbon sources, which are the most abundant sugar monomers from the hydrolysis of lignocellulosic materials. In this study, biosurfactants were produced by six bacterial isolates belonging to the Bacillus genus. The six bacterial isolates were identified molecularly through 16S rRNA sequencing. The results showed that the six bacterial isolates were identified as B. subtilis ITBCC46, B. subtilis ITBCC40, B. subtilis ITBCC31, B. siamensis ITBCC36, B. xiamenensis ITBCC43, and B. subtilis ITBCC30. All Bacillus species used in this study could be grown on glucose or xylose media. Biosurfactants produced by B. subtilis ITBCC46, B. subtilis ITBCC40, B. subtilis ITBCC31, and B. siamensis ITBCC36 could reduce surface tension below 40 mN/m (32.70 to 39.15 mN/m). All biosurfactants produced by these Bacillus species had more than 50% emulsification stability. These characteristics indicated that the biosurfactants had the desired quality.
木质纤维素材料是可用于降低生物表面活性剂生产成本的原材料之一,因为它价格低廉、来源丰富,并且含有纤维素和半纤维素,可水解为葡萄糖和木糖作为碳源。本研究旨在评估以葡萄糖和木糖作为碳源的芽孢杆菌属生物表面活性剂的生产,葡萄糖和木糖是木质纤维素材料水解后最丰富的糖单体。在这项研究中,使用六种属于芽孢杆菌属的细菌分离物来生产生物表面活性剂。这六种细菌分离物通过 16S rRNA 测序进行了分子鉴定。结果表明,这六种细菌分离物被鉴定为枯草芽孢杆菌 ITBCC46、枯草芽孢杆菌 ITBCC40、枯草芽孢杆菌 ITBCC31、解淀粉芽孢杆菌 ITBCC36、厦门芽孢杆菌 ITBCC43 和枯草芽孢杆菌 ITBCC30。本研究中使用的所有芽孢杆菌属都可以在葡萄糖或木糖培养基中生长。枯草芽孢杆菌 ITBCC46、枯草芽孢杆菌 ITBCC40、枯草芽孢杆菌 ITBCC31 和解淀粉芽孢杆菌 ITBCC36 产生的生物表面活性剂可以将表面张力降低到 40 mN/m 以下(32.70 至 39.15 mN/m)。这些芽孢杆菌属产生的所有生物表面活性剂的乳化稳定性都超过 50%。这些特性表明生物表面活性剂具有所需的质量。