Validation of the Orr theory in dental resin-based composites: A fractographic approach.

OBJECTIVES

The present study aimed to assess the applicability of Orr's equation on light-cured resin-based composites (RBCs) tested in 3- and 4-point bending tests, as well as assess the operator reliability of this method.

METHODS

Fracture mirrors of 320 specimens (n = 320) made of four RBCs that had failed in the two tests were analyzed microscopically and consequently two radii of each specimen were measured by two operators, each measuring twice. The mirror constant A was calculated using Orr's equation. The results of the two operators were compared using a t-Test and further assessment of the data was performed using a MANOVA, Tukey's post hoc test and regression analysis.

RESULTS

With the exception of 11 specimens, the measurement of the fracture mirror radii was carried out successfully. The calculation of the mirror constant proved successful with a high coefficient of determination (R > 0.98). The calculated mirror constants were operator-independent if the results of more than one measurement was taken into consideration. The ratio of the mirror constant A to the fracture toughness K lay between 2.1 and 2.4 for three of the four RBC. The fourth RBC had a ratio of 1.6 and was the only one where different mirror constants were observed as a function of the testing method.

SIGNIFICANCE

The present study proves the applicability of brittle fracture mechanics on RBCs despite them often being regarded as not brittle due to their also plastic behavior.