Department of Trauma, Hand, Plastic and Reconstructive Surgery, University Hospital Würzburg, Oberdürrbacher Staße 6, 97080, Würzburg, Germany.
Arch Orthop Trauma Surg. 2023 Oct;143(10):6251-6259. doi: 10.1007/s00402-023-04979-8. Epub 2023 Jul 17.
Proximal ulna fractures with a large zone of comminution, such as in the context of Monteggia injuries, require mechanically strong osteosyntheses as they occur in regions with high physiological joint load. Consequently, implant failure and pseudarthrosis are critical and devastating complications, especially with the background of mainly young patients being affected. An effective solution could be provided by adding a small second plate 90° angulated to the standard dorsal plate in the area of non-union. Thus, this study investigates whether, from a biomechanical point of view, the use of such a mini or baby plate is worthwhile.
Comminuted fractures distal to the coronoid process, equivalent to Jupiter type IIb fractures, are generated on artificial Sawbones of the ulna and stabilized using two different plate osteosyntheses: in the first group, a dorsal locking compression olecranon plate is used (LCP group). In the second group, a small, ulnar 5-hole olecranon plate is added as a baby plate in addition to the mother plate at the level of the fracture zone (MBP group). Dynamic biomechanical loading in degrees of flexion from 0° to 90° is carried out to determine yield load, stiffness, displacement, and changes in fracture gap width as well as bending of the dorsal plate.
The "mother-baby-plate" osteosynthesis had a significantly higher yield load (p < 0.01) and stiffness (p = 0.01) than the LCP group. This correlates with the increased movement of the proximal fracture element during cyclic testing for the LCP group compared to the MBP group as measured by an optical metrology system.
Here, we show evidence that the addition of a small plate to the standard plate is highly effective in increasing the biomechanical stability in severe fractures equivalent to Jupiter type IIb. As it hopefully minimizes complications like pseudarthrosis and implant failure and as the additional preparatory effort leading to compromised blood supply is regarded to be negligible, this justifies and highly advises the use of a mother-baby-plate system.
伴有大粉碎区域的尺骨近端骨折,例如孟氏骨折,由于发生在生理关节负荷较高的区域,因此需要机械强度高的内固定。因此,植入物失败和假关节是关键且破坏性的并发症,尤其是在主要受年轻患者影响的背景下。在骨不连区域添加一个与标准背侧钢板成 90°角的小钢板,可以提供有效的解决方案。因此,本研究从生物力学的角度探讨了使用这种微型或婴儿钢板是否值得。
在人工尺骨上模拟冠状突下粉碎性骨折,相当于 Jupiter Ⅱb 型骨折,并使用两种不同的钢板内固定进行固定:在第一组中,使用背侧锁定加压钢板(LCP 组)。在第二组中,除了在骨折区域使用母板外,还在母板上加用一个小的、尺骨 5 孔鹰嘴钢板(MBP 组)。进行从 0°到 90°的屈伸动态生物力学加载,以确定屈服载荷、刚度、位移以及骨折间隙宽度的变化和背侧钢板的弯曲。
“母-婴-板”内固定的屈服载荷(p<0.01)和刚度(p=0.01)均明显高于 LCP 组。这与光学测量系统测量的 LCP 组在循环测试中近端骨折块的运动增加有关,而 MBP 组则没有。
在这里,我们证明了在严重骨折(相当于 Jupiter Ⅱb 型)中添加小钢板可显著提高生物力学稳定性。由于它有望最大限度地减少假关节和植入物失败等并发症,并且由于导致血供受损的额外准备工作被认为可以忽略不计,因此使用母-婴-板系统是合理的,并强烈建议使用。