A prospective study to assess and quantify the setup errors with cone-beam computed tomography in head-and-neck cancer image-guided radiotherapy treatment.

INTRODUCTION

This study was done to quantify the translational setup errors with cone-beam computed tomography (CBCT) in the image-guided radiation therapy (IGRT) treatment of head-and-neck cancer (HNC) patients.

AIMS

The objective was to quantify the setup errors by CBCT.

METHODOLOGY

One hundred patients of HNC were enrolled from March 2020 to March 2021 for IGRT treatment. Pretreatment kV-CBCT images were obtained at the first 3 days of irradiations, and setup error corrections were done in the mediolateral (ML), superior-inferior (SI), and anterior-posterior (AP) directions. Subsequently, a weekly kV-CBCT was repeated for whole duration of radiotherapy for the next 6-7 weeks. Adequacy of planning target volume (PTV) margins was assessed by van Herk's formula.

RESULTS

Total 630 CBCT scans of 100 patients were analyzed. Setup errors greater than 3 mm and 5 mm were seen in 11.4% and 0.31% of the patients, respectively. Systematic errors and random errors before correction in ML, SI, and AP directions were 0.10 cm, 0.11 cm, and 0.12 cm and 0.24 cm, 0.20 cm, and 0.21 cm, respectively. Systematic errors and random errors after correction in ML, SI, and AP directions were 0.06 cm, 0.07 cm, and 0.07 cm and 0.13 cm, 0.10 cm, and 0.12 cm, respectively.

CONCLUSION

CBCT at the first 3 fractions and then weekly during radiotherapy is effective to detect the setup errors. An isotropic PTV margin of 5 mm over clinical target volume is safe to account for setup errors, however, in the case of close organ at risk, or with IGRT, a PTV margin of 3 mm can be considered.